WTB: fuel tank for 3hp briggs

Status
Not open for further replies.

Russ2251

AZUSA:Powered by LAWN-BOY
Messages
6,622
Reaction score
43
Location
Huntington Station, Long Island, NY
Fill tank to about 1/3 and let soak for at least 8-12 hours. Swish it around every once in a while. Try to keep it covered and in a cool area as this this stuff evaporates very quickly.
how many times should i do it?
Depends on how bad it is. Sometimes one time is enough. Just have to see how it goes.
Crap that comes out IS toxic. Don't try to re-use it. Place used stuff in a disposable metal container (coffee can?) and just let it evaporate and then chuck it.
 

ed1380

Banned
Messages
1,182
Reaction score
1
Location
ATL, GA
o. well. what i did was do a 1/4 to 1/3 full of acetone. threw some nuts and screws in there, and started shaking it around. i kinda got carried away and the little holder tank disinegrated :oops:

so anyone got a 3.5hp briggs engine? i just want the numbers off of it
 

Russ2251

AZUSA:Powered by LAWN-BOY
Messages
6,622
Reaction score
43
Location
Huntington Station, Long Island, NY
i kinda got carried away and the little holder tank disinegrated
Kinda jumped the gun with nuts and screws. Doesn't really matter. If tank was that weak, it was destined to be replaced anyway.
Correct way would have been to soak (8-12 hours) and flush with acetone first.
Then fill with water along with small bolts, nuts, washers etc.
Then shake around. Will take several cycles of this until tank is pristine. Looks like factory new. I've done this on tanks dating back to days of Briggs powered washing machines.
Next time I need to do this, I will document w/pics.
 

zanegrey

zanegrey
Messages
148
Reaction score
0
Location
n.ky
i used the bathroom cleaner called clr..

and then rinsed it very well..

worked like a charm..
 

G0Kart103

New member
Messages
12
Reaction score
0
Briggs Tanks

Here is what I got.
 

Attachments

  • Briggs tank 005.jpg
    Briggs tank 005.jpg
    111.8 KB · Views: 2
  • Briggs tank 006.jpg
    Briggs tank 006.jpg
    113.7 KB · Views: 3
  • Briggs tank 007.jpg
    Briggs tank 007.jpg
    114.6 KB · Views: 1
  • Briggs tank 008.jpg
    Briggs tank 008.jpg
    113.6 KB · Views: 0
  • Briggs tank 001.jpg
    Briggs tank 001.jpg
    112.7 KB · Views: 1
  • Briggs tank 002.jpg
    Briggs tank 002.jpg
    113.4 KB · Views: 2
  • Briggs tank 003.jpg
    Briggs tank 003.jpg
    111.8 KB · Views: 3
  • Briggs tank 004.jpg
    Briggs tank 004.jpg
    112.9 KB · Views: 3

Robb_Wolfe

'I need speed'
Messages
26
Reaction score
0
Location
Michigan
well heres what happened today




thats what i got from the original cover. still seams to be a vertical shaft. so more pics




its smaller than the 5hp tanks


i have a ****-load of those type of tanks, name a color and i'll see what i can do:thumbsup:
 

jr dragster T

New member
Messages
3,966
Reaction score
8
Location
Cold place
Omfg does this :censored: spam ever stop. I've been deleting spam for about 30 minutes now and its under almost EVERY hot thread.
 
Status
Not open for further replies.
Top