alwaysinboost
New member
- Messages
- 8
- Reaction score
- 0
I put a new predator engine in my sons kart a few weeks ago. we got all the bugs worked out and slowly he's getting used to the power. He is at the point where he can hold WOT all the time and still control the kart, so I figured he's about ready for more power.
Problem is I can't get the motor to stay WOT.
WHen you push the gas pedal all the way down, the motor will rev up like its going to make full power, then it will fall back slightly, then rev up again. it keeps doing this the whole time your foot is to the floor. I made a video to show what is happening with the linkage.
https://youtu.be/4laTPYA-TiE
In the vid you can see the throttle linkage slowly moving and you can hear the RPM increase. The linkage closest to the camera is the throttle cable and the straight bar that is moving back and forth above the throttle linkage is where the problem is. That bar is moving all on its own.
I am sure it has something to do with how the linkage is setup or how the carb is setup. Hopefully this is descriptive enough and someone more knowledgeable than myself can narrow it down. TIA.
Problem is I can't get the motor to stay WOT.
WHen you push the gas pedal all the way down, the motor will rev up like its going to make full power, then it will fall back slightly, then rev up again. it keeps doing this the whole time your foot is to the floor. I made a video to show what is happening with the linkage.
https://youtu.be/4laTPYA-TiE
In the vid you can see the throttle linkage slowly moving and you can hear the RPM increase. The linkage closest to the camera is the throttle cable and the straight bar that is moving back and forth above the throttle linkage is where the problem is. That bar is moving all on its own.
I am sure it has something to do with how the linkage is setup or how the carb is setup. Hopefully this is descriptive enough and someone more knowledgeable than myself can narrow it down. TIA.