Wanted Lawn-Boy/Trade 196cc Clone
- Thread starter Russ2251
- Start date
- Status
carolinasled
New member
- Messages
- 22
- Reaction score
- 0
Hey guys, Been awhile since I last posted, I ran across this on a lawnboy search. I've got a 1996 Silver Series Lawnboy 4.75hp model 10227 serial 6947945. Just wondering is this engine Horizontible? If so Russ do you have a diy tech article?
Russ2251
AZUSA:Powered by LAWN-BOY
Answered via PM.
Answers to most questions regarding vertical to horizontal conversions with most 2 cycle Lawn-Boy engines (not 'M's, 'C's or 'A's) are posted throughout this site (various threads).
Things are just too nuts for me to document all of it in one place. Perhaps a dedicated thread? Not up to me. May not be enough interest to keep it alive for very long.
On occasion, my inbox is inundated with questions. About half of them come from this site. I would rather answer questions in these forums so that anyone/everyone, who may be interested, can benefit.
Keep in mind that the use of L-B engines is not a cheap or easy answer to replace the garden variety Briggs or Tecumseh 4 cycle.
Thanx,
Rusty
Answers to most questions regarding vertical to horizontal conversions with most 2 cycle Lawn-Boy engines (not 'M's, 'C's or 'A's) are posted throughout this site (various threads).
Things are just too nuts for me to document all of it in one place. Perhaps a dedicated thread? Not up to me. May not be enough interest to keep it alive for very long.
On occasion, my inbox is inundated with questions. About half of them come from this site. I would rather answer questions in these forums so that anyone/everyone, who may be interested, can benefit.
Keep in mind that the use of L-B engines is not a cheap or easy answer to replace the garden variety Briggs or Tecumseh 4 cycle.
Thanx,
Rusty
nickzom
New member
Do you still need The Duraforce?
I have a complete Silver Series mower, 6.5 Horse, Runs good.
I will part it out If I have to.
I will take the clone if you have it.
I have a complete Silver Series mower, 6.5 Horse, Runs good.
I will part it out If I have to.
I will take the clone if you have it.
Russ2251
AZUSA:Powered by LAWN-BOY
I, or somebody, will get back to you shortly.
nickzom
New member
ok, i will be waiting.
Russ2251
AZUSA:Powered by LAWN-BOY
Sorry for the delayed response.
I am no longer looking to trade my clone for a DuraForce as I won a 3rd one on Ebay.
Someone else in this forum showed some interest but decided against it. Hence the delayed response.
I would strongly recommend not parting out mower as they are much more valuable complete. I've seen them going for upwards of $300. Not many folks are interested in parts, unless it is a restoration project and parts cannot be gotten any other way. DuraForce are still relatively new (1998 to 2004) and new factory original parts are still in production.
Thanx for posting.
I am no longer looking to trade my clone for a DuraForce as I won a 3rd one on Ebay.
Someone else in this forum showed some interest but decided against it. Hence the delayed response.
I would strongly recommend not parting out mower as they are much more valuable complete. I've seen them going for upwards of $300. Not many folks are interested in parts, unless it is a restoration project and parts cannot be gotten any other way. DuraForce are still relatively new (1998 to 2004) and new factory original parts are still in production.
Thanx for posting.
Russ2251
AZUSA:Powered by LAWN-BOY
I would suggest starting a new thread or pm me with specifics/pics.
- Status