uploading pics

[stevek]

Hi. I'm new to the site; wanted to post some jpeg pics but keep getting error. Any help?

 

[jr dragster T]

Hmm, Personally and alot of other's just use photobucket and paste the picture right into the thread.

 

[Russ2251]

just use photobucket

Problem with this is it eats up a lot of posting space and sometimes (to me anyway) can get annoying when a large amount of pics are posted. I prefer thumbnail attachments.
Examples of both (identical photos):

 

[minibugger]

I've had the same problem as stevek. I guess i'll try another method.

 

[stevek]

posting photos

hi....i'm a newbie too....use photobucket...it was suggested to me on this site and works ok

 

[stevek]

suggested by : jr dragster Tyler

 

[sayre315]

hey Mr. Russ
i have a question about that tilly
im thinking about putting one on my briggs 5hp and i saw that the throttle is VERY short.
So how do you hook it upto the pedal without it being EXTREAMLY sensative?
to you have some sort of leaver gear reduction thingy majigger?

 

[Russ2251]

I run linkage straight to carb. No lever reduction and not sensitive. Works fine for me.

 

[sayre315]

realy?
thats wierd
i guess my pedals are a lil differant
i'll play with it
thank you

 

[Kenny_McCormic]

Where the cable attaches to the pedal changes sensitivity. All you really need for throttle is fast enough to lock up the clutch and wide open.

 

[sayre315]

well i want to be able to push my pedal around half way down for it to be WOT instead of pushing it down about 1"-2" for WOT

 

[Kenny_McCormic]

put cable closer to the pedals pivot point.

 

[sayre315]

ok, thanks alot for your help

 

[jarcynvicnchris93]

heres some pics

Tyler I understand what your saying however let me say this.. Im sure these tie rods could be bent but like the other guy who welded pipe over his rods it sure cannot hurt compared to the 1/4" diameter rods Ive seen most people on here use.


http://s265.photobucket.com/albums/ii202/jarcynvicnchris93/?action=view&current=PICT0341.jpg

http://s265.photobucket.com/albums/ii202/jarcynvicnchris93/?action=view&current=PICT0342.jpg

http://s265.photobucket.com/albums/ii202/jarcynvicnchris93/?action=view&current=PICT0343.jpg

http://s265.photobucket.com/albums/ii202/jarcynvicnchris93/?action=view&current=PICT0340.jpg

 

[jr dragster T]

Ohhhh I see what you mean now. My kart use's 3/8 threaded rod and havent had any probelem's. How did those tie rods just randomly fit? I could probably make some in a lathe for very cheap.

 

[jarcynvicnchris93]

dude I suck

Ohhhh I see what you mean now. My kart use's 3/8 threaded rod and havent had any probelem's. How did those tie rods just randomly fit? I could probably make some in a lathe for very cheap.

Sorry Tyler I did not mean to post those pics in this thread. I was looking at this one and I kind of forgot where I was. Im moving back over to the Tie Rod thread