Universal Exhaust Mount / Bracket

[Munk]

Hey everyone,

I have a custom loop header installed on my kart, but feel like it needs some additional support. The thing is, this header is an odd shape and the bracket that came with it won't work for my application. Are there any universal brackets that have multiple adjustible parts that really give you many options on how to install it? Or is there some other solution that might work for this thing?

Pic of header and surrounding areas:
https://photos.app.goo.gl/RzdXqDnnCA857isb8

 

[mckutzy]

I can't see the pic... Direct upload..

Make a brace from the end, bolt it to the valve cover..
Or where ever on the motor..

 

[JTSpeedDemon]

With some fab work, you might be able to use a hose clamp like that to make a header support bolting onto the frame rack:

 

[2SlickNick]

Call Rex at RTT he will get you squared away. That pipe looks like his too LOL.
https://www.robertsonstorquetubes.com/product-page/cushion-mount-cm

---------- Post added at 05:46 PM ---------- Previous post was at 05:44 PM ----------

With some fab work, you might be able to use a hose clamp like that to make a header support bolting onto the frame rack:

He would have to brace it the lower sub frame/ swing arm.

 

[mckutzy]

Here lets make a better view of the pic...

 

[Hellion]

Couldn't enlarge the pic. Ahh, much better.

You could simply brace it with a piece of flat rod bolted/welded to the lower frame pivot (so it moves with the engine) and the other end could be attached to the pipe with a hose clamp. It would serve as a strain reducer mainly.

Neat looking trumpet style pipe.