Even better, look no further than CarsandCameras attempt at turbocharging their drift trike and the nightmare that turned out to be. The amount of time they spent trying to turbo that 420 is just insane. They had to ditch the carb for a $700+ fuel injection kit, that I might argue gave them more power than that turbo was putting out. Speaking of that EFI kit, that was a nightmare for them to even install. Like I said, you're better off building up the engine than adding a turbo for better gains, or getting a larger engine all together. If it's going into a custom frame, you'll be many hours ahead with a larger engine than a turbo 212.
I think even a N20 (nitrous oxide) kit might be cheaper and would give similar gains as the turbo. But for $99.99 plus the turbo, oil cooler and pump, associated parts for all of that, you'll be at the cost or well above for a 420cc engine, or built 212, with larger gains.
If it's for wheelies out the wazoo, you can hear it deep to compensate so much cheaper. Point is, anyone looking to turbo an industrial engine, you'll save your self time, money and headache by going with a built or larger engine.