Tecumseh Vector carb

Status
Not open for further replies.

Poboy kartman

Senior Moments Member
Messages
12,461
Reaction score
73
Location
White Settlement Texas
Oh...so sorry...I forgot you guys can't read titles! It's a TECUMSEH VECTOR CARBURETOR!

You think you can find two that are differently assembled internally? (correctly? )

I'll settle for ANY Vector breakdown!
 

Poboy kartman

Senior Moments Member
Messages
12,461
Reaction score
73
Location
White Settlement Texas
I assume you have looked at this and concluded your's is from a different Tecumseh dimension?

http://outdoorpowerinfo.com/repairs/tecumseh_vector_carb.asp

Nope....if I had found that...I wouldn't have been asking for a breakdown. Even though that doesn't show a breakdown...it showed me enough. Thanks for the help!

It's the same old dilemma now....new one is on the way,(hopefully the correct replacement,) because buying replacement Tech carbs costs about $1 more than a kit!

The O rings were shot in the one I had....I didn't even know there was one at the end of that drain assembly! And...I didn't have it assembled correctly...(the emulsion tube/spring...)
 

ezcome-ezgo

G'me sumthin to write on
Messages
6,028
Reaction score
3,041
Location
Atlanta, GA
Working on Tecumseh motors is it's own reward, that is: blood, sweat and pain, all for next to nothing. I respect anyone who is a fan of them, because that's crazy.
 

Poboy kartman

Senior Moments Member
Messages
12,461
Reaction score
73
Location
White Settlement Texas
Yeah...it's not like I have the cash to just go out and buy whole engines. This paticular engine is a good one...industrial grade cast iron sleeved...but mainly, it's sitting on a DR brush cutter that has a chainsaw blade on it....soooo...the profit potential is there.

Not only are Tecrapsey's fickle...(pretty much just the carbs)... but the part#s are FUBAR as well ....at least to me!

I'm only into this thing for $40...+$15 for a new carb (if it's the right one?????) Then if everything works...I can look into a battery (and hope the starter works! )

If I had the string trimmer head for it...I might even keep it...and use it to mow my scumbag neighbors lawn...(Who thinks you only need to mow the front once a month....and the back when the city makes you!):mad2::mad2::2guns:
 

zbuck

New member
Messages
781
Reaction score
5
Location
Ft. Wayne, IN
Nope....if I had found that...I wouldn't have been asking for a breakdown. Even though that doesn't show a breakdown...it showed me enough. Thanks for the help!

It's the same old dilemma now....new one is on the way,(hopefully the correct replacement,) because buying replacement Tech carbs costs about $1 more than a kit!

The O rings were shot in the one I had....I didn't even know there was one at the end of that drain assembly! And...I didn't have it assembled correctly...(the emulsion tube/spring...)
:wai: Good move on a new carb, as I have found that trying to rebuild that type of carb is useless.
 

Poboy kartman

Senior Moments Member
Messages
12,461
Reaction score
73
Location
White Settlement Texas
That link is on the Helpful Links sticky. Looks like you were doing a freerunner by not searching :D:D

I was searching the net...it didn't occur to me to search here because it's a vertical shaft engine it's on.

But it wasn't a FreeRunner move...I was asking for information I was having trouble locating, not ignoring advice and cobbling something up.
 

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,866
Location
Chicago-town USA
http://www.tecumsehcarburetorguide.com/tecumseh-parts/
"Another best part about the guide offered by us is that you can see in-depth parts detail of every Tecumseh carburetor that is available. "
Not sure if this helps. Lots of carbs in this one. Now Break It Down! -MC Hammered

---------- Post added at 01:24 AM ---------- Previous post was at 01:21 AM ----------

One of my favorite ways to surf the web is to search Google Images, then click on the page that has the image. Some times you find gems!

I found this in two seconds! Did your search include XXX like usual?:roflol:

AND Strings are hard to measure (Delta p)(Delta x) =h/4pi:huh:
 

Poboy kartman

Senior Moments Member
Messages
12,461
Reaction score
73
Location
White Settlement Texas
http://www.tecumsehcarburetorguide.com/tecumseh-parts/
"Another best part about the guide offered by us is that you can see in-depth parts detail of every Tecumseh carburetor that is available. "
Not sure if this helps. Lots of carbs in this one. Now Break It Down! -MC Hammered

---------- Post added at 01:24 AM ---------- Previous post was at 01:21 AM ----------

One of my favorite ways to surf the web is to search Google Images, then click on the page that has the image. Some times you find gems!

I found this in two seconds! Did your search include XXX like usual?:roflol:

AND Strings are hard to measure (Delta p)(Delta x) =h/4pi:huh:

So glad you found that nearly useless information so quickly. All that had was a paragraph describing a Vector carb.

For all you guys smart a$$ remarks, nobody ever came up with a breakdown, which is what I was asking for!!! It doesn't matter now, but don't make an A$$ out yourself trying to make one out of me.

BTW: I located a breakdown finally anyway....ON MY OWN.

EDIT : BTW: I had already been to where you linked BEFORE I started this thread! (It's how I figured out it was a Vector carb!)

One last thing: I wish clicking on Google images did something for me....all clicking on them has ever done is make them bigger.

EDIT: (Again! ) Actually, Bob, this has turned out to be the best information I've gotten in a long time!!!! I didn't know to click on the page on images!!!! THANK YOU! !! Gonna make my search life much easier now!
 

ezcome-ezgo

G'me sumthin to write on
Messages
6,028
Reaction score
3,041
Location
Atlanta, GA
I wasn't going to mention this, but since you are in a mood: the original "helpful" link I provided was the first result of a Google search for "Tecumseh Vector Engine". That's why I was thinking you had obviously seen it.
 

Poboy kartman

Senior Moments Member
Messages
12,461
Reaction score
73
Location
White Settlement Texas
I wasn't going to mention this, but since you are in a mood: the original "helpful" link I provided was the first result of a Google search for "Tecumseh Vector Engine". That's why I was thinking you had obviously seen it.

No..as I said...I hadn't. Sometimes it just takes one word to make a big difference. The link you gave me was helpful. (I had already found Bob's link.)

Now ....here's what's funny : "Tecumseh Vector breakdown " didn't help much. Googling: "Tecumseh Vector Carburetor images " brought a breakdown right up!

Go figure....If I hadn't spent considerable time hitting dead ends..I wouldn't have asked for help.

I think part of the problem was it took a long time just to figure out it was a Vector carb!
 
Status
Not open for further replies.
Top