Fairly happy with TC2
I got mine 2 sent to Australia from gokartsusa 2 months ago. I am pretty happy with the final result, but like metalthrashman said there are a few minor issues.
1. On a 13hp honda clone the CVT has to go driven pully to the front because it hits the cooling fins the other way around.
2. On a 13hp clone you have to machine the spacer to align the 2 pulleys.
3. The nylok nut on the jackshaft only just goes on far enough to lock onto the nylon.
4. If you overtighten the nylok nut just a little bit too much the circlip on the other end comes off, but this is an easy fix-Just get a hacksaw and carefully deepen the circlip groove (just a little bit). This gives the circlip a deeper grip.
5. Dont believe that a GTC TC2 will handle 13hp. As I learned on this forum, when Comet made them they were rated to 8hp.
Most of the problems with my unit are caused by using a 13hp motor and not the fault of the unit itself. As I have said before I am running it on a heavy dirt buggy with 22" rears a 10tooth/60 tooth sprocket combo, but I have ordered an 80 tooth rear sprocket, but if it keeps cooking belts, I,ll bite the bullet and get an 8hp motor instead. If GTC want to sell a CVT for 8hp and up they should start also making the next one up from the Comet TAV2.
In summary the GTC unit is well made and very reliable. I would recommend anyone to get one as it makes the buggy so much fun to drive.
Cheers.
Simon.