Sprocket help

[Riley W]

Hmm ok I'll try to pick one up at my hardware store, thanks!

---------- Post added at 04:16 PM ---------- Previous post was at 03:50 PM ----------

Oh and I was also wondering what type of locktite I should use on my bearing set screws, last time I drove the kart every single set screw flew off. The vibration on this kart is absolutely insane. And the axle was completely loose. I don't know if loctite would do the job, I was thinking of using red or green but the red needs heat to unthread and I don't know how I would do that (not really an issue, I would figure it out) and he green is a little less strong. Is loctite even gonna make a difference?

 

[Poboy kartman]

Never heard of green....blue should be fine.

 

[ezcome-ezgo]

Loctite red is the answer. If you want it to stay where you put it. Now is the time when we say: please post a pic of your kart.

 

[Poboy kartman]

BLUE!!!!! Might as well dip them in epoxy as use red!!!! Remember....these are setscrews!!!!

 

[Riley W]

Yea but I used blue on my gas tank bolts and 3 out of 4 vibratated loose, I think I'm going to go with red.

 

[ezcome-ezgo]

Purple! No, Yellow! You can defeat the red with a torch and leverage. Just like we did to the Soviet Empire.

 

[Riley W]

https://youtu.be/Rdc3E7RI9og Sorry the video is kinda dark but I'll be uploading a video of me driving it soon, very soon.

 

[chancer]

Get some Locking collars. The split type. Put them on either side of the set screwed items.
This will keep the stuff in place.

 

[Riley W]

Yea I've got some of those thanks