outcrydrummer
KART ART
I've decided to just create this thread instead of piggy backing on multiple threads.
GOAL:
To turn my predator powered race kart into a tire smoking, draw dropping, yard ripping, chick magnet.
CURRENT STATE:
Predator 212 specs.........
bully 2 disc racing clutch
stock head
stock valve train
Mod 2 cam
ARC +.020 billet rod
.650 ruxing carb (22vm mikuni already on order arriving 2/6/2017)
open header
open air intake
Piston in hole .025
Clayed with no head gasket with .080 valve to piston clearance
Head gasket ( Fire ring .045)
Stock flywheel (I ordered the wrong part number first time around )
I'm slightly concerned with the current crank as I saw some heat discoloration on it.
Thinking I should order a new crank, + .040 rod, and a .019 MLS head gasket.
I tried the metal .010 and it didn't seal worth a crap.
That would get me .005 in the hole and I would have plenty of piston to valve clearance.
The Question Is
What would you buy??
My current this week spending limit is right around 250 bucks.
---------- Post added at 02:05 PM ---------- Previous post was at 01:34 PM ----------
Another option I was considering....
I have another predator that I removed governor on but otherwise is stock.
I could just transfer over a few parts and then I don't need to worry about buying a new crank.
I could just order this:
Black mamba cam
split keepers and retainers
+.040 rod (Have to pull head tonight to verify deck height first)
.019 mls head gasket
billet flywheel
Install the vm22 on this engine
Install open header on this engine
Then I just leave the other engine alone with the mod 2 cam in it, the .650 carb, and open air filter and put that on the drift trike (where the new stockish engine would come from).
GOAL:
To turn my predator powered race kart into a tire smoking, draw dropping, yard ripping, chick magnet.
CURRENT STATE:
Predator 212 specs.........
bully 2 disc racing clutch
stock head
stock valve train
Mod 2 cam
ARC +.020 billet rod
.650 ruxing carb (22vm mikuni already on order arriving 2/6/2017)
open header
open air intake
Piston in hole .025
Clayed with no head gasket with .080 valve to piston clearance
Head gasket ( Fire ring .045)
Stock flywheel (I ordered the wrong part number first time around )
I'm slightly concerned with the current crank as I saw some heat discoloration on it.
Thinking I should order a new crank, + .040 rod, and a .019 MLS head gasket.
I tried the metal .010 and it didn't seal worth a crap.
That would get me .005 in the hole and I would have plenty of piston to valve clearance.
The Question Is
What would you buy??
My current this week spending limit is right around 250 bucks.
---------- Post added at 02:05 PM ---------- Previous post was at 01:34 PM ----------
Another option I was considering....
I have another predator that I removed governor on but otherwise is stock.
I could just transfer over a few parts and then I don't need to worry about buying a new crank.
I could just order this:
Black mamba cam
split keepers and retainers
+.040 rod (Have to pull head tonight to verify deck height first)
.019 mls head gasket
billet flywheel
Install the vm22 on this engine
Install open header on this engine
Then I just leave the other engine alone with the mod 2 cam in it, the .650 carb, and open air filter and put that on the drift trike (where the new stockish engine would come from).