KenMathisHD
Member
- Messages
- 48
- Reaction score
- 2
Stainless steel it is, I’ll check out Napa’s selection. I got lucky and found a good clutch on eBay for really cheap. It’s damaged, the plates that squeeze the belt are broken, but the bell and clutch assembly are undamaged. The plates for my clutch are still good and move freely, so all I’ll need to do are clean the old assembly off, grease it up so the plates don’t get hung up, and swap the new clutch, spring and bell onto the old shaft and tighten up the nut to hold everything together. $50 for a basically new clutch.