Riding Lawn Mower Engine

Status
Not open for further replies.

Ewallen

New member
Messages
11
Reaction score
0
How would i go about making a mini buggy with the following:
I have a 12.5 HP kawasaki engine out of an old john deer riding lawn mower. It has a clutch alredy on it. What would i have to do to make this work. Going to use the kart for off roading and climbing hills. Thanks
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
How would i go about making a mini buggy with the following:
I have a 12.5 HP kawasaki engine out of an old john deer riding lawn mower. It has a clutch alredy on it. What would i have to do to make this work. Going to use the kart for off roading and climbing hills. Thanks

You're asking waaay too much in a simple question. There may be 400 ways to attack this project. Start by posting some pics of what you have to work with. Cruise the forum for ideas and concepts, and start to develop a design plan. Assess your tools and skills.

You may find that you're better off taking a different approach to the project, or maybe it's not feasible at all. If this is your first build, I suspect it may be too much.

First, let's see what you have to work with.
 

Ewallen

New member
Messages
11
Reaction score
0
This is my first build. I just really wanted some kind of simple suspension system on it. I'm just not sure how I'm going to be able to work with the belt thats currently on it. And how to make the axles. And yes, it is a horizontal shaft.
 

Attachments

  • 0923121445.jpg
    0923121445.jpg
    48.8 KB · Views: 7

Ewallen

New member
Messages
11
Reaction score
0
Would i just replace pullys to give it extra speed. I just wanted a throttle pedel so it wouldn't be at a fixed rpm.
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
You can swap pulleys around to alter the ratios. however- be advised that lawn tractor steering and braking components (as well as other aspects) are not designed for speed. If you want to go fast, you've got a lot of work to do. If you want to go a bit faster, then you're probably okay. I wouldn't risk anything more than 50-75% more speed than you have now without getting into reworking things.
 

Ewallen

New member
Messages
11
Reaction score
0
Yea. I was going to rework the frame to allow for suspension. And somehow work a throttle cable into it so i have adjustable rpms. Thanks man. I really needed some help with this.
 

gvfc2

wishing i was living
Messages
943
Reaction score
4
Location
Tacoma,wa
i was looking into pretty much the same thing before i sold my riding mower. what type of transaxle do you have?
 

Ewallen

New member
Messages
11
Reaction score
0
Throttle linkage, Rear axle, Pully to rear axle. Unfortunatly the gas tank is right where i need to be sitting so i guess im going to have to extend the frame.
 

Attachments

  • 0923121549.jpg
    0923121549.jpg
    43.8 KB · Views: 7
  • Axle.jpg
    Axle.jpg
    67.4 KB · Views: 9
  • downsize_1.jpg
    downsize_1.jpg
    50.3 KB · Views: 6

Ewallen

New member
Messages
11
Reaction score
0
Not sure. Odd john deere design. The engines in the front. It has a fuel pump with the gas tank in the back. I have a lot of frame work to do. And I'm not sure how to rework the pullys. It has one coming from the engine that i cant really see the size of. Some pullys for tension. And the rear one.
 

gvfc2

wishing i was living
Messages
943
Reaction score
4
Location
Tacoma,wa
well what ever type of transaxle it is it would be best to take it apart take all the grease out and the put a gasket on it and reseal it and then fill with some gear oil. so insure it will handle the extra rpms. also you dont need to do but it would help a great deal if you intend to go any fater than 10-15mph
 

machinist@large

Active member
Messages
2,865
Reaction score
34
Location
West Michigan, 49331
well what ever type of transaxle it is it would be best to take it apart take all the grease out and the put a gasket on it and reseal it and then fill with some gear oil. so insure it will handle the extra rpms. also you dont need to do but it would help a great deal if you intend to go any fater than 10-15mph

From what little I've seen & heard, all Deere tractors for the last 10~15 years have been hydrostat's of one form or another; if so, this being his first build, tearing it apart would be a bad idea. If it is a straight gear box, then your advise is (potentially) applicable. Hydraulic systems are A LOT less forgiving, and I personally would not recommend just tearing into one without any prior knowledge & experience.

Besides, why tell him to just tear into it if it won't do what he want's when, as is, he might be able to turn around and sell/ trade it for what he might want? :thumbsup:
 
Status
Not open for further replies.
Top