MadManAndrew
Fun-Club Chairman
If anything, I'm worried that the springs I have may be too stiff. They are very stiff. As with anything, we'll see when it's finished and if they don't work they will get replaced. Thank you for the website. I would normally order from Mcmaster-Carr but they've giving me fits lately anyway. I actually stole these from work, we've got a whom array of this size in different spring rates, so that's probably where I'll return to. As for the angling of the tie rod arms, no, I did not. I always use 90* spindles and achieve the correct Ackerman geometry at the steering/pitman arm.