Ok so when yall talk about noobs without knowing it you are referring to me. Im 27 and have never even rode on a go-kart. That being said any answers need to be in plain english although I am mechanically knowledgeable. What I have is a go kart that I bought for my kids and want to finish fixing it. I have the full frame tires and a motor. what I do not have is the clutch. I thought that they were all the same until I went to buy one and found out different. I believe I have all of the info that someone would need to tell me what I need. The tires are AT22X11-8. They are 22 inches tall. The sprocket has 60 teeth and is 10 inches tall. I plan to put a 5 horse briggs and stratton that i already have that is bone stock. I also noticed while counting the teeth on the sprocket that I have to turn the tire twice before the sprocket will make one complete turn. This go kart will not be for competition I am not looking for the most speed just the power to climb hills and it will be for kids from 6 to 13 and as they get older. I hope that that is all the info that is needed if more is needed just let me know and I will correct it.