New minibike build, and a few others..

Status
Not open for further replies.

Raywelder

Not an Adm¡nistrator
Messages
760
Reaction score
0
My little brother is about to stitch my solo seat together.
Coming together really good. I would post pics of it in the making. But my phone broke and I Dont feel like breaking out the digi camera.
 

Raywelder

Not an Adm¡nistrator
Messages
760
Reaction score
0
My little brother finished the seat!


 

Raywelder

Not an Adm¡nistrator
Messages
760
Reaction score
0
I have made alot of progress, For one the swingarm is now removed and the rear frame is built, its not completley welded yet, but its been built. I mounted the differential to the frame the other day. It now has an open U-joint and Driveshaft. It looks amazing compared to what it looked like with the swing arm.
I havent took any pics of it lately due to my phone breaking and not having a good camera phone.
 

Raywelder

Not an Adm¡nistrator
Messages
760
Reaction score
0
taking it home so I can get more work in on it here.


I will have better pictures tommorow in the daylight.
 

Raywelder

Not an Adm¡nistrator
Messages
760
Reaction score
0
Its not even really a mini-bike, that **** thing is pretty big.

The original idea was to put the twin motor on a minibike, but then I changed my mind and did a full sized build.
Still cant change the title
 

Raywelder

Not an Adm¡nistrator
Messages
760
Reaction score
0
About to finish the exhaust, After i took these pics I welded them up, cleaned them up, and painted them black, I'm going to wrap them tommorow afternoon, and they should be done.



 

Raywelder

Not an Adm¡nistrator
Messages
760
Reaction score
0
Got a video of it running, Phone didnt pick up the noise very clearly. The exhaust doesn't sound amazing, but not horrible, But definitely is on the loud side.
 

squat251

New member
Messages
156
Reaction score
1
just checked in on this, looks very nice. dont know if you noticed, but that nut on the back there in the vid looks an awful lot like its turning while your revving it up. might wanna nip that in the butt, before yours is spread on the road!
 

Raywelder

Not an Adm¡nistrator
Messages
760
Reaction score
0
just checked in on this, looks very nice. dont know if you noticed, but that nut on the back there in the vid looks an awful lot like its turning while your revving it up. might wanna nip that in the butt, before yours is spread on the road!

Yea i did notice that! I would crank it down tight, but i have no axle spacers so i would just be squeezing the frame together.
 

Raywelder

Not an Adm¡nistrator
Messages
760
Reaction score
0
Pegs
Pictures of some frame gussets, Mounted license plate and Taillight bracket, And as you can see the pipes have been wrapped and painted. Also, I made new handlebars.
A few Pictures of the KZ650, Its nearly done.
 

macrylinda1

New member
Messages
1
Reaction score
0
Haha, Agreed,
For the record, mine isn't going to look anything like that, that ones just... :ack2:

I'm needing your opinions. You see what what wheels and everything Im going to be using, What Direction should I go with this. To kind of stick with the minibike idea, so I want it to be a bit smaller than A full sized bike.
__________________________
 
Last edited by a moderator:
Status
Not open for further replies.
Top