scottbahl
New member
Hi all,
I just tried out my off road go kart after installing a bigger engine and a torque converter.
The problem is.... the torque converter was having trouble engaging.
When the engine was revved, the belt would slip on the torque converter pulleys and drive the kart very slowly. Occationally, the belt would seem to 'catch' on the pulleys and the kart would take off quiclkly, as it should.
The pulleys were also getting EXTREMELY hot. The idle speed is set a little too high, which causes the driver pulley to very slightly engage on the belt when the kart is still. I dont suspect that is contributing to the problem though.
Do any of you know why the belt was not properly engaging?
Here is all the information about the kart:
40 series torque converter (comet chinese knockoff)
11 HP 340cc engine, 3600 RPM max
290lbs without rider
5.5:1 reduction through sprockets
16" diameter tires
---------- Post added at 09:23 PM ---------- Previous post was at 09:22 PM ----------
Here is a link to an image of the kart:
http://imgur.com/RxLlb60
The image doesnt seem to be displaying on my original post
I just tried out my off road go kart after installing a bigger engine and a torque converter.
The problem is.... the torque converter was having trouble engaging.
When the engine was revved, the belt would slip on the torque converter pulleys and drive the kart very slowly. Occationally, the belt would seem to 'catch' on the pulleys and the kart would take off quiclkly, as it should.
The pulleys were also getting EXTREMELY hot. The idle speed is set a little too high, which causes the driver pulley to very slightly engage on the belt when the kart is still. I dont suspect that is contributing to the problem though.
Do any of you know why the belt was not properly engaging?
Here is all the information about the kart:
40 series torque converter (comet chinese knockoff)
11 HP 340cc engine, 3600 RPM max
290lbs without rider
5.5:1 reduction through sprockets
16" diameter tires
---------- Post added at 09:23 PM ---------- Previous post was at 09:22 PM ----------
Here is a link to an image of the kart:
http://imgur.com/RxLlb60
The image doesnt seem to be displaying on my original post