We bought a 200cc x pro mini bike to mod and ride. We ended up with an engine that was basically given to us from our pastor. It was a 224cc predator, but it wasnt running. He said the engine was not at top dead center and it might need some adjusting. We opened it up, and after our inspection we decided the engine was toasted. We don't have the tools to repair it. There were pins missing on the side cover, the carb was not installed properly, the entire engine block was visibly damaged and scratched, and a few more things i forgot about. Because it had a decent carb and exhaust, we decided to buy a new 224 (even though a 212 would've worked) and put those parts on it. We mounted the carb properly and straight chained it, meaning it was geared pretty dang high. Basically there was so little low end torque you could barely get her moving when stopped. As soon as she started to go though, she would be gone. Anyways, we got the new engine set up, and we tuned the carb maybe correctly. We took her for a spin, and when she was going slow, full throttle would cause her to big down. We did remove the governor and everything, but if you can help me out with it bogging down that'd be great. Just to clarify, if you used like half throttle or less she would do just fine. Only full throttle would bog her down.
EDIT: We do have a clutch on it, and she does run decent except for the issue with full throttle bogging er down
EDIT: We do have a clutch on it, and she does run decent except for the issue with full throttle bogging er down
Last edited: