Built Fast Kyle
New member
- Messages
- 9
- Reaction score
- 4
So I’m planning to replicate the Chuck graves R6 kart for autoX. I like the simplicity of a solid axle, and small size. I don’t want to go the stretched shifter kart frame with a 600cc motor. They’re just too small. I can fabricate most of the build but I’d prefer to find off the shelf parts like the live axle setup. And the front spindle/axle solution. I don’t have a lathe. I know he’s running FSAE tires and wheels. If you have any links to some of the main components you can spot on his kart id appreciate it!
Items in trying to source:
-FSAE wheels (I think they are 10” aluminum)
-FSAE Hoosiers I can’t get
-50mm live axle with bearings
-front axle solution (prefer to not have a-arms/ suspension)
- maybe a rear brake system that works with a 50mm axle.
-FSAE wheels (I think they are 10” aluminum)
-FSAE Hoosiers I can’t get
-50mm live axle with bearings
-front axle solution (prefer to not have a-arms/ suspension)
- maybe a rear brake system that works with a 50mm axle.