firemanjim
Just kartin' around....
As some of you know, I FINALLY found me an old mini bike. And its an old Sears Roper at that,..... Found a used rear wheel assembly I needed. And the 2 speed transmission I found on eBay. What I couldn't find those ,was the bracket for the 2 speed. The one that holds/makes up the jack shaft assembly. After looking at omb , and remembering a thread where our very own rmm727 made a copy of the bracket I needed. Hmmmm, after a short conversation, I now have a custom built for my use, bracket. Looks exactly like it would have, from the factory. Omg! Very nice work! I test fit it onto my chassis. Perfect fit. No fiddling with it. Just slid right into place. I test fit the clutch set up into the bracket..... Man, this was the silver lining to my otherwise dreary day. Looks perfect, to me.....
Thank you very much Ryan. Not sure what I would have done without your help.
After another short conversation, I asked for permission to baost and brag about the new bracket, I was given a green light.
OK folks, if you need a custom bracket or something to that effect, send a PM to RMM727 with the pertinent information on what you need. If its something he can make for you, he said he would gladly lend a hand. (Small fee of course.... ) I could have made me something myself, BUT it would NOT have been as nice as what I received. This might be the light at the end of your tunnel, on a part you just can't seem to get right, or you just can't make. Look at the following pictures to see his quality work. From first conversation, to it being in my hands, was a 4-5 day turn around too. Great price for what I got. Could NOT be any happier, even if it was free.....
If you have something you want made, like a battery tray, reproduction part,ect... try him out. If he can do it, you won't be disappointed.
And now for some pics.....
Thank you very much Ryan. Not sure what I would have done without your help.
After another short conversation, I asked for permission to baost and brag about the new bracket, I was given a green light.
OK folks, if you need a custom bracket or something to that effect, send a PM to RMM727 with the pertinent information on what you need. If its something he can make for you, he said he would gladly lend a hand. (Small fee of course.... ) I could have made me something myself, BUT it would NOT have been as nice as what I received. This might be the light at the end of your tunnel, on a part you just can't seem to get right, or you just can't make. Look at the following pictures to see his quality work. From first conversation, to it being in my hands, was a 4-5 day turn around too. Great price for what I got. Could NOT be any happier, even if it was free.....
If you have something you want made, like a battery tray, reproduction part,ect... try him out. If he can do it, you won't be disappointed.
And now for some pics.....
Attachments
-
IMG_20150302_143920.jpg81.3 KB · Views: 15
-
IMG_20150302_143930.jpg88.2 KB · Views: 13
-
IMG_20150302_143943.jpg73.7 KB · Views: 12
-
IMG_20150302_143959.jpg68.1 KB · Views: 13
-
IMG_20150302_210655.jpg66.7 KB · Views: 19
-
IMG_20150302_210713.jpg71.5 KB · Views: 15
-
IMG_20150302_210723.jpg71.8 KB · Views: 12
-
IMG_20150302_210732.jpg74.1 KB · Views: 16
-
IMG_20150302_210743.jpg65.6 KB · Views: 14