My Buddy & I just got back from a ''long'' road trip to pick up these 2 vintage Kart chassis.
Mine is an 80''s Coyote ''Bullet'' sprint.
His,, is an early 80's, Margay 'Xpert'' sprint.
They are well used, but for 250 bucks ea.,, it was more than well worth the trip.
They are ''each'' going to be powered by 48v - 2000w ''1109'' BLDC motors , & 2 -''12ah'' - 48v. - 13s 4p packs w/BMS., ''connected in parallel'',, giving a total of 24ah.
Each pack will have 52 - 3000ma ''Li'' - 18650 cells.
Gearing on my buddy's Kart is going to start @ 6.7 - 1.
Mine, being a heavier Kart & guy,, is going to start @ 6.9 - 1.
We both have 6 & 6.5 in. wide 6'' rims ,& will be putting on Carlisle 2 - ply turf saver ''2'' - 15/6.5/6 tires on the backs ,, & 13/5/6 ones on the fronts.
They are just going to be large Subdivision street cruisers,, & will probably do only around 35,, but that's cool.
Got ''a lot'' of work to do,, & hope to have them both done by spring.
They will also both have 3 spd. switches, reverse,, & brake lights ect.
My buddy's AUW should be around 110lbs.,, Mine is probably going to be around 120,, as my frame is heavier.
My frame is going to be a med. candy electric blue.
Buddy's at the moment,, he is thinking bright signal yellow.
Ian
P/S,,
if somebody wants the ''vintage'' 4 spoke steering wheel on the Bullet,, send me a PM with an offer.
Am going to put a 3 spoke 12'' on it.
Mine is an 80''s Coyote ''Bullet'' sprint.
His,, is an early 80's, Margay 'Xpert'' sprint.
They are well used, but for 250 bucks ea.,, it was more than well worth the trip.
They are ''each'' going to be powered by 48v - 2000w ''1109'' BLDC motors , & 2 -''12ah'' - 48v. - 13s 4p packs w/BMS., ''connected in parallel'',, giving a total of 24ah.
Each pack will have 52 - 3000ma ''Li'' - 18650 cells.
Gearing on my buddy's Kart is going to start @ 6.7 - 1.
Mine, being a heavier Kart & guy,, is going to start @ 6.9 - 1.
We both have 6 & 6.5 in. wide 6'' rims ,& will be putting on Carlisle 2 - ply turf saver ''2'' - 15/6.5/6 tires on the backs ,, & 13/5/6 ones on the fronts.
They are just going to be large Subdivision street cruisers,, & will probably do only around 35,, but that's cool.
Got ''a lot'' of work to do,, & hope to have them both done by spring.
They will also both have 3 spd. switches, reverse,, & brake lights ect.
My buddy's AUW should be around 110lbs.,, Mine is probably going to be around 120,, as my frame is heavier.
My frame is going to be a med. candy electric blue.
Buddy's at the moment,, he is thinking bright signal yellow.
Ian
P/S,,
if somebody wants the ''vintage'' 4 spoke steering wheel on the Bullet,, send me a PM with an offer.
Am going to put a 3 spoke 12'' on it.
Last edited: