mini choppa

[nawizzel15]

here are the wheels im going to be mounting on my chopper only ten inches kinda small for the back but i can always upgrade later sprock cent clutch and chain should com in on tuesday. i would post my finish frame on here but its in school i cant wait to put all the stuff on it now=] thanks to everyone on this site for helping me out

 

[nawizzel15]

awsome my chain sprocket and clutch came really really fast here they are

 

[2or3wheels]

looks like your gonna have some good torque with that small wheel and big sproket.

 

[athif]

whats the degree of turn u gonna have with that? the sprocket might scrape the ground

 

[nawizzel15]

ya i thought about that im just going to make the hub really small so the sprocket is close to the wheel and ill have pretty good turning

 

[RobertD]

those look like 4" wheels, and when you turn you're going to hit the sprocket if it's a 60 tooth. I've had the same problem. Get a 6" rear wheel, even a 5 would work, but that small one wont' do it...

 

[athif]

looks like the exact one from princess auto, excessive weight causes the bolts to release both sides of the rim and space apart, mine started to split in half so i welded the bolts shut.