biddie_gibbs2.0
Member
Hey guys first of just goin to say thact i love this site. its very informative an interesting. i'm biddie_gibbs2.0 formally biddie_gibbs. i couldnt remember my email or password so i have to start over. but enough rambling on i am interested in building a mini bike. a BAD mini bike. But i have a few questions about the the engine an clutch or torque converter. just like everyone else here i want power an speed an all. so i was considering a azusa mini bike kit with the ten inch tires and putting a 13 hp clone motor on it. one like this.
www.ebay.com/itm/NEW-13-HP-GAS-ENGINE-GO-CART-SIDE-SHAFT-LOG-SPLITTER?item=400205071368&cmd=ViewItem
i originally wanted a 16hp motor but after seeing deminsions it was way too tall. so this engine will do. as you know the governor is coming off and a new billet flywheel fron nr-racing will go on then down to the local machine shop to mill the head to up the conpression then to my experienced buddy to personally port an polish the heads. am still looking for a cam an springs. along withthe basics like new air filter custom bugle exhaust done by me. an rejet the carb. i want this engine to be bad. but here is my problem i want to put a torque converter on it with a jackshaft but they are expensive. i am not paying 300 bucks for the driver then another 300 for the driven. so i am thinking centrifical clutch. but what clutch will be good for abuse from the engine an a nut driver like myself? i want to know all opinion plz. all the engine building will be done myself an mods too. my machine shop is dirt dirt cheap AND reliable. an my buddy will do the port and polish job for like next to nothing. so the build price is 299 for the frame fork wheels etc from azusa and the then i think 279 for the 13hp engine then machine work an port an polish 25bucks an other misc stuff pricing coming. any an all suggestions are welcome an needed thanks.
www.ebay.com/itm/NEW-13-HP-GAS-ENGINE-GO-CART-SIDE-SHAFT-LOG-SPLITTER?item=400205071368&cmd=ViewItem
i originally wanted a 16hp motor but after seeing deminsions it was way too tall. so this engine will do. as you know the governor is coming off and a new billet flywheel fron nr-racing will go on then down to the local machine shop to mill the head to up the conpression then to my experienced buddy to personally port an polish the heads. am still looking for a cam an springs. along withthe basics like new air filter custom bugle exhaust done by me. an rejet the carb. i want this engine to be bad. but here is my problem i want to put a torque converter on it with a jackshaft but they are expensive. i am not paying 300 bucks for the driver then another 300 for the driven. so i am thinking centrifical clutch. but what clutch will be good for abuse from the engine an a nut driver like myself? i want to know all opinion plz. all the engine building will be done myself an mods too. my machine shop is dirt dirt cheap AND reliable. an my buddy will do the port and polish job for like next to nothing. so the build price is 299 for the frame fork wheels etc from azusa and the then i think 279 for the 13hp engine then machine work an port an polish 25bucks an other misc stuff pricing coming. any an all suggestions are welcome an needed thanks.