mini bike an engine ideas

Status
Not open for further replies.
Messages
71
Reaction score
31
Location
Orangeburg, SC
Hey guys first of just goin to say thact i love this site. its very informative an interesting. i'm biddie_gibbs2.0 formally biddie_gibbs. i couldnt remember my email or password so i have to start over. but enough rambling on i am interested in building a mini bike. a BAD mini bike. But i have a few questions about the the engine an clutch or torque converter. just like everyone else here i want power an speed an all. so i was considering a azusa mini bike kit with the ten inch tires and putting a 13 hp clone motor on it. one like this.

www.ebay.com/itm/NEW-13-HP-GAS-ENGINE-GO-CART-SIDE-SHAFT-LOG-SPLITTER?item=400205071368&cmd=ViewItem

i originally wanted a 16hp motor but after seeing deminsions it was way too tall. so this engine will do. as you know the governor is coming off and a new billet flywheel fron nr-racing will go on then down to the local machine shop to mill the head to up the conpression then to my experienced buddy to personally port an polish the heads. am still looking for a cam an springs. along withthe basics like new air filter custom bugle exhaust done by me. an rejet the carb. i want this engine to be bad. but here is my problem i want to put a torque converter on it with a jackshaft but they are expensive. i am not paying 300 bucks for the driver then another 300 for the driven. so i am thinking centrifical clutch. but what clutch will be good for abuse from the engine an a nut driver like myself? i want to know all opinion plz. all the engine building will be done myself an mods too. my machine shop is dirt dirt cheap AND reliable. an my buddy will do the port and polish job for like next to nothing. so the build price is 299 for the frame fork wheels etc from azusa and the then i think 279 for the 13hp engine then machine work an port an polish 25bucks an other misc stuff pricing coming. any an all suggestions are welcome an needed thanks.
 

j.concepcion54321

Rebuilding KTM, Need Kart
Messages
1,251
Reaction score
5
Location
East Providence RI
I have an 8 horse engine that I can sell you. Its a genuine honda gx240 with the same performance parrs that you were talking about this will be more than enough power.. And its more reliable cause its a honda not a clone let me know if your interersted.

Other than tht if ur machine shop does things cheaple maybe it'll be cheaper to get everything made instead of ordering the kit.... That's just a suggestion butt I can't kno for sure.
 
Messages
71
Reaction score
31
Location
Orangeburg, SC
a kit like as far as intake an exhaust? but I have to find a cam an springs. I can find an aluminum flywheel. an I appreciate ur offer an I will consider that I really want a huge engine big Carb an loud exhaust. what about clutch or converter? u guys t great thanks
 
Messages
71
Reaction score
31
Location
Orangeburg, SC
anybody am just looking for a quality clutch for heavy duty something that has been tested an all. I don't mind spending a oil green on it just not 600 bucks on a torque converter. plaza anyone?
 

anderkart

Moderator
Messages
6,432
Reaction score
392
Location
Surprise Arizona USA
The 13hp engine in your ebay link is larger than the info says, they posted the 6.5hp engine dimensions, Check out this link to see what I mean: http://www.ebay.com/itm/NEW-6-5-HP-...159?pt=LH_DefaultDomain_0&hash=item5d30154657

The 13hp Lifan clone dimensions are actually more like 15.4" x 17.7" x 17.1" I'm pretty sure the 16hp Lifan clones are the same physical size as their 13hp model, they just have a larger bore/longer stroke.


I'd suggest using the Noram Star clutch: http://www.out2win.com/catalog/noram.html#star

You'll find lots of high performance GX390/13hp-clone info here: http://karting.4cycle.com/forumdisplay.php?f=72
 
Messages
71
Reaction score
31
Location
Orangeburg, SC
well as much as I hate ricers an stuff yeah I want a fast lil bike. an thanks for the opinions an suggestions am going to look into them all. well since the diminsions are about the same with the 16hp clone. do anyone know if there's another frame that's bigger to acomadate the increased height on the engine OR do o have to go custom frame route? plz keep up the Hood work guys thanks.
 
Status
Not open for further replies.
Top