Electritech
New member
I finally pulled the trigger and bought a used kart from Craiglist last week. It's a Manco Intruder II 617C. 7hp Subaru engine and 30 series torque converter. The engine runs but I was not able to test drive it due to a broken belt. Supposedly the kart was kept in a garage when not in use but the drive components are definitely showing a lack of care. It looks to me that they were running the kart without the belt cover, the pulleys are rusty and the chain has some links rusted up solid. This is going to be a Christmas present for my daughter so I want to take the time and get this running right. I've ordered a new chain and have the driven pulley taken apart. The bronze bushing is cracked so I'll be ordering a new one. I am a little concerned about the driver weight assembly wear. Also, I noticed on the driven sprocket the spring is in the #1 position. Most everything I've read recommends the spring being placed in the #2 position. So, I would appreciate any recommendations whether or not I should order a new driver weight assembly and if I should change the spring position on the driven sprocket. The kart will be used mostly off road, no big hills but open fields that are not flat by any means. Thanks in advance. I will try to post some pics, so please bear with me if they don't come through.