Manco Dingo 390u bent axle

[Largetall1]

I may be too big for my kart but got some air the other day and now the left rear wheel wobbles bad which is obvious when my wife drives it past me. Appears to be bent axle and I have parts list but can't find any online parts house that has what I am looking for. I need an Oklahoma repair shop or possible a customize shop. Any ideas???

 

[Whitetrashrocker]

Take the axle off and put in a press and bend it back. A local shop could do it for a few bux.

 

[JTSpeedDemon]

BMIKarts has the PDF manual for a Dingo 390U: http://www.bmikarts.com/PDF/Manco/Model No. 390U/Manco Go Kart 390 U operators manual.pdf

If you can measure the axle, look on:

www.ombwarehouse.com
www.bmikarts.com

 

[950speed]

If it’s the hex axle then what is a possibility (and I did this for mine) is I went and measured the stock length and all dimensions and then went to a metal supplier and bought that length of stock. After which I machined down to 3/4in on the end and added threads. Total costs was right at $28 and it works just fine. Now I’m sure you could probably do this with a round axle also and it may/may not be cheaper. Idk haven’t checked round prices.

Any questions about the hex axle feel free to ask, I’ve need there and done that I know the annoyance.