manco dingo 2020

[Earthy]

Got out to the garage this afternoon and took se pic of the big block on my Dingo.

Here is shot of back straight on. You can see the engine sits about an inch higher than stock.

Series 40 torque converter clearance.

 

[Whitetrashrocker]

On my dingo I had to reinforce the engine plate. It came with a 9hp engine but after a few hard floggings I noticed the welds were breaking. I took some steel strap and welded them to the side runners and added another top plate. I also welded in some legs from the middle of the engine plate to the lower frame.

 

[Mr. Spindle]

i figured out the mounting, thanks everyone for sharing your opinion and your projects!
next thing is the brakes...

 

[Whitetrashrocker]

Right on. Show us what you did.

And share the brake issue. I wish mine worked better.

 

[Mr. Spindle]

ah yes, my bad for not posting anything while updating y’all. if it’s still light outside i’ll be able to take some pictures, if not i can after work tomorrow.