Making a Go KArt 4wd?

Status
Not open for further replies.

OzFab

Well-known member
Messages
15,615
Reaction score
66
Location
Warwick Qld, Australia
As far as i know you can make an awd go kart unless you have 2 engines

That's not true in any way...

Drive train out of a scrap import quad will get you most (if not all) of the parts you would need. Expand your horizons.

The most difficult issue is finding/making hubs that drive & steer; once you nail that, the rest is (relatively) easy...
 

NotSoMasterMind

New member
Messages
112
Reaction score
1
Location
South lyon michigan
Unless you can find a gearbox i dont think you can, i guess you could just run a drive shaft up and down the axle, live axle in the back and shaft running to each wheel, but too complex to explain
 

OzFab

Well-known member
Messages
15,615
Reaction score
66
Location
Warwick Qld, Australia
It's not that complex, chain from clutch to J/S with three sprockets, one sprocket for clutch chain, the other two for both axles; simple really...

Driving the axles is not the issue; as I stated previously,

The most difficult issue is finding/making hubs that drive & steer...
 

Poboy kartman

Senior Moments Member
Messages
12,461
Reaction score
63
Location
White Settlement Texas
It would only be icy here for about 2 minutes if that happened here. LOL

Yeah....I heard an 18 wheeler crashed hauling a load of ice...and people lined up to get it....and only the first ten people got ice!!!!

The next 10 got cold water....the next ten warm baths, and the last ten boiled ostrich eggs....
 

Mammoth

Active member
Messages
174
Reaction score
74
Location
Durham, CA
When you mentioned 4wd kart i thought of this one which is on affordablegokartparts web site.

 
Status
Not open for further replies.
Top