Lt-f230

[The-Kid]

hello just got a suzuki mode:LT-F230 I'm missing rimes and wheels dose any one know were i can buy rims for front ? i don't have the manual so i don't know wat kind and online i can't find a thing about this LT-F230

suzuki dual rage 230cc 86-87

and if i can't find rims and wheels i might make a off road kart with it it still run's well i don't want to wast it .

 

[jonboy]

Post some pics. I have both a 1988 lt230e and a lt230s may be able to help find a few things

 

[cumminsbayou4x4]

iv got a 85 suzuki lt230 id need to see pictures of it cause you say its duel range but i dont think they made the sport one with it

 

[brandongeiger2]

I have an 86 lt125 what do your hubs look like? Are they the three or four bolt? Also here's where you can find a manual.

http://web.ebscohost.com/serrc/sear...8493-d9fbae0cf86a@sessionmgr112&vid=1&hid=125
Username: Marshal
Password: Public

 

[The-Kid]

yea is a 4 bolt hub wheel i got wheels and all just not the original and thay were drilled from other wheels so it don't work well i got pic on my profile idk if is what you need but check it out

[/IMG]

a pic without the seet lol battery died lol need new front wheels

me about to add anty rush to the frame

 

[anderkart]

yea is a 4 bolt hub

You need to measure the bolt-circle size of your hubs, It'll be a metric/mm. size. Once you know the
bolt-circle size, you could shop for rims from other brand/model quads that will fit your hubs.

This chart has quad bolt-circle specifications: http://www.pureoffroad.com/ATV_Wheel_Bolt_Pattern_Guide.htm

You measure across, and to the exact center of 2 studs like this pic:

 

[machinist@large]

Stanley Tools makes a combination inch/ metric tape measure that is very handy for things like this. It's a 29 footer but at the time it was the same price as a 25. I bought it at Home Depot. The metric side of the blade is calibrated in mm, cm, and meters. Hope this helps.

 

[jonboy]

I am almost positive that is 4/130 bolt pattern. Most of the quadrunner versions were except for ones with the five lug rear. They were 5/160.

 

[jonboy]

Try this link....
http://www.rockymountainatvmc.com/p/43/53/257/991/5461/8666/Douglas-.125-Wheel

 

[brandongeiger2]

I have had trouble finding the bolt pattern of mine as well but what size front rim do you need? i have all four with cheap tires on them i was planning on replacing them.

 

[The-Kid]

tomorrow i will measure and take a photo of the measure and all and if you got all tier's and if thay Mach how much ?? and thanks guy's for all the help

 

[The-Kid]

 

[jonboy]

That is the wrong way to measure the bolt pattern. See the previous post that Anderkart posted,it has the diagrahm on how to measure. Did you see my post on the pattern size or the link I posted?

 

[The-Kid]

i tride to do that but my mesuring tape is stop by the chaft or axle in the midel il tri again

 

[buddyochoa]

Generally the different bolt patters available aren't extremely similar. Meaning if you measure 9cm and there is a wheel with 10cm bolt pattern its probably your wheel.

 

[anderkart]

Hey jonboy, It would be easiest to measure with a Caliper like the pics below. There's usually models available for under $10 at hardware stores, or maybe you even know someone that would loan you a pair.

Or, if you just take that spindle nut and hub off, you could get an accurate reading with your tape measure.

 

[The-Kid]

kk just got new tiers and rimes thanks for the help and now ama install LED light's on my front rack i gotta make a housing and modify my rack now ama post pictures of the updates wen im done

 

[landuse]

kk just got new tiers and rimes thanks for the help and now ama install LED light's on my front rack i gotta make a housing and modify my rack now ama post pictures of the updates wen im done

What!!!

 

[Doc Sprocket]

kk just got new tiers and rimes thanks for the help and now ama install LED light's on my front rack i gotta make a housing and modify my rack now ama post pictures of the updates wen im done

What!!!

Run through the translator:

Okay- I just got new tires and rims, thanks for the help! Now I'm going to install LED lights on my front rack. I've got to make a housing and modify my rack now. I am going to post pictures of the updates when I'm done.

 

[landuse]

Run through the translator:

Okay- I just got new tires and rims, thanks for the help! Now I'm going to install LED lights on my front rack. I've got to make a housing and modify my rack now. I am going to post pictures of the updates when I'm done.

Sheeesh. I turn off when I have to strain my brain. Thanks for the translation