Looking to build go kart as a summer project

[istratmoen]

Hello all, I am looking to build a go kart as a fun summer project. I have a few parts in mind

Frame-
https://minneapolis.craigslist.org/ank/snw/4978611190.html (Would this work?)

Engine-
212cc from HF

Transmission-
http://www.amazon.com/TORQUE-CONVERTER-CLUTCH-COMET-218353A/dp/B00FQQ2CXG#Ask

After that I am pretty helpless as to what else I would need. Any suggestions?

 

[2SlickNick]

I would start with more of a yard frame kart 1st. Especially if this is your 1st time.

https://minneapolis.craigslist.org/ank/grd/4982712274.html

https://minneapolis.craigslist.org/ank/snw/4965178625.html

 

[OzFab]

So, why did you link those two? Presonally, I wouldn't touch either of those; the OPs choice looks to be the best of a bad bunch, just be aware, it's gonna need a lot more than just an engine & TC, that's when the dollars start adding up...

 

[istratmoen]

If a yard frame would be the better option, would building one make more sense? I know some people that can stick weld and I think my grandpa could source cheap tubing.

 

[2SlickNick]

I was just linking the only yard frames I could find in his area just to give an example. Ya those are crap. I do like his.... just thought a certain degree of expertise is needed for a race kart.

 

[OzFab]

If a yard frame would be the better option, would building one make more sense? I know some people that can stick weld and I think my grandpa could source cheap tubing.

Yes & no; again, that depends on your level of expertise; at least with that frame, you have a well built frame...

The opinion in my previous post still stands...

Oh & no double posting please...

 

[istratmoen]

Sorry, still new to this fourm setup.

 

[landuse]

I would wait and see if a better frame becomes available in your area. To rebuild a race kart can cost a lot more than a yard kart because of the more specialised parts needed. You might even be able to get a kart that has everything on it for a cheap price. When you start buying stuff individually it adds up

 

[HippieHeadShot]

If a yard frame would be the better option, would building one make more sense? I know some people that can stick weld and I think my grandpa could source cheap tubing.

That is what i am doing, bought a FLUX welder and a grinder. local steel mill sells tubing for a 1.59 a foot. they gave me scrap tubing for free to practice my welding.

even so be aware it is pricey! i'm already in for 300+ and still need suspension, steering, brakes, drive sprocket & chain.... just to have the basics!

and good luck man! it is a lot more fulfilling to DIY just make sure your able, don't want to start and spend a bunch to have parts sitting in the garage.