Where can I find the various clevis and cable ends for setting up brake and throttle linkages? Also, it seems that throttle setup is easier on the Tecumseh OHV engine than the BS engine. Is there a way to set up the throttle on the BS that is easy? Seems that the factory linkage is really designed for tillers and such where a slide control is used, rather than an active linkage.
Linkage Parts
- Thread starter rose62
- Start date
Hellion
Moderator
- Messages
- 8,352
- Reaction score
- 3,507
Any kart shop, or just about anywhere for your first question. Fun karts by nature use sort of rudimentary off-the-hardware-store-shelf items. I have a set of Briggs Raptor throttle kits (may or may not be rudimentary) that have a lot of useful parts in them, bought off fleabay.
We have a parts supplier thread in the FAQ that should be mostly up to date.
I have no experience with the Tecumseh OHV but all these stationary industrial engines use a “Rube Goldberg” contraption, I mean governor linkage that’s pretty complex. There’s no direct linkage to the carb on the vast majority of these engines like you said. The governor is a rev maintainer so that’s paramount on a tiller. Lots of people keep the governor intact….
We have a parts supplier thread in the FAQ that should be mostly up to date.
Websites for Go Kart Parts
MFG Supply Good for basic karts parts Harbor Freight Engine The Infamous Harbor Freight engine M&D Mower Replacement parts for the Clone-Hondas and Hondas. Also great for manuals and other replacement parts for all sorts of engines. Affordable Go Karts Great site for aftermarket parts and...
www.diygokarts.com
I have no experience with the Tecumseh OHV but all these stationary industrial engines use a “Rube Goldberg” contraption, I mean governor linkage that’s pretty complex. There’s no direct linkage to the carb on the vast majority of these engines like you said. The governor is a rev maintainer so that’s paramount on a tiller. Lots of people keep the governor intact….
Edwin Spangler
Well-known member
- Messages
- 786
- Reaction score
- 759
Ill add that its pointless to remove it unless you plan on upgrading parts and making it faster. The stock engine works much better WITH it.
-And like Helion always mentions, you can adjust them. You can almost get another 1000rpm on top of the stock 3600. So again, even more pointless.
Hellion
Moderator
- Messages
- 8,352
- Reaction score
- 3,507
You mean a Briggs and Stratton 5 HP flathead? Please be more specific and feel free to bore us with excruciating, nauseating detail or show me some photos? I'd rather communicate with photos, caveman paintings, etc. to be honest.
For me, BS is
...it's just the first thing that comes to mind. 
Try OMB Warehouse or MFG Supply. The latter has a flat rate shipping charge for most items.
Hellion
Moderator
- Messages
- 8,352
- Reaction score
- 3,507
Is it an early version with the adjustable-jet Pulsa-Jet carb or the later fixed-jet version?
The Briggs Raptor throttle kit was designed for the early adjustable-jet carburetors (and the later ones modded for racing) but it can be adapted to the later fixed-jet carbs. The fixed jet carbs are most easily identified by the rotary choke and the air cleaner that looks like a Big Mac
box.
www.ombwarehouse.com
Otherwise, use the factory governed throttle under the fuel tank.
This is the kit used on most factory karts and minibikes.
The Briggs Raptor throttle kit was designed for the early adjustable-jet carburetors (and the later ones modded for racing) but it can be adapted to the later fixed-jet carbs. The fixed jet carbs are most easily identified by the rotary choke and the air cleaner that looks like a Big Mac
box.
Briggs Raptor Throttle Kit
Briggs & Stratton Raptor Throttle Linkage Kit - For use on ungoverned engines with a billet flywheel in racing applications.
www.ombwarehouse.com
Otherwise, use the factory governed throttle under the fuel tank.
This is the kit used on most factory karts and minibikes.