88s10Durango
New member
Hi all , on my soon to be Off Road kart , I want to run a 12 volt system with a decent battery for lights and my winch , can`t run a belt off the main axle as if the belt were to break or need replacing then I don`t want to have to dismantle the whole CV axle and main axle to put a new belt in ! So I`mtoying with the idea of making a small separate jackshaft with a small sprocket to run on the underside of the main driver chain somewhat like a tensioner , then the proper size V-belt pulley on the shaft to drive the 10Si , only problem with this I see is it won`t charge until the kart is actually moving , I need a good 12 volt dc system though as my engine only has a weak 6 vdc 3 amp charge stator and I have a 2000 lb 12 vdc winch I will be mounting on this kart . Any thoughts to this , I`ve checked on changing out the stator but a $ 50 jackshaft compared to a used stator , regulator and such >> $ 400 is why I want to try this .
heres a some what of a pick with my idea ,
heres a some what of a pick with my idea ,
