ID This Engine Please

OneTimeUser

We Don't Rent Pigs
Messages
165
Reaction score
171
Location
Texas
Seems little engines multiply like rabbits. I have a bunch now and can't remember where half of them even came from. This one for example.

It says OHC on the valve cover. I looked around a bit and learned that Honda and Subaru (at least) make an OHC engine.

Can anyone identify this one? I could find no manufacturer's markings.

Thanks in advance.
 

Attachments

  • IMG_E7615[1].JPG
    IMG_E7615[1].JPG
    2.1 MB · Views: 6
  • IMG_E7616[1].JPG
    IMG_E7616[1].JPG
    2 MB · Views: 4
  • IMG_E7617[1].JPG
    IMG_E7617[1].JPG
    1.9 MB · Views: 8
  • IMG_E7618[1].JPG
    IMG_E7618[1].JPG
    2.3 MB · Views: 7

Hellion

Staff Murderator
Messages
9,468
Reaction score
4,393
Subaru, EX line, one of the very few overhead cam (not OHV pushrod) engines. It has a timing chain. Quite desirable.
Show us the numbers on the block if you can

Edited to add (for reference):

EX Engine Models​

  • EX13 – 4.5 horsepower
  • EX17 – 6 horsepower
  • EX21 – 7 horsepower
  • EX27 – 9 horsepower
  • EX30 – 9.5 horsepower
  • EX35 – 12 horsepower
  • EX40 – 14 horsepower
  • EX21 EFI – 7 horsepower
  • EX27 All Season – 9 horsepower
 
Last edited:

OneTimeUser

We Don't Rent Pigs
Messages
165
Reaction score
171
Location
Texas
I will. Thanks.

Now I'm gonna look around for specs and availability of performance parts. Got a new cart yesterday and am wondering what engine to put on it.

I've been very happy with my Tillotson electric start, but may install this OHC engine if it can be hotrodded to produce some power.
 

65ShelbyClone

Well-known member
Messages
726
Reaction score
261
Location
SoCal
I can't remember because it's been so long since I sold the EX27 I had, but the block might be marked with the model or displacement kinda like a Honda. They're nice engines, but have no aftermarket support.
 

Hellion

Staff Murderator
Messages
9,468
Reaction score
4,393
Kinda suspected, like 65Shelby says, they are too few and far between to have hot rod parts. A niche engine but I have no idea, truly. The OHC is the novelty. ;)

Should be able to rev more quickly minus the clunky pushrods and tappets.
 

65ShelbyClone

Well-known member
Messages
726
Reaction score
261
Location
SoCal
The cam has only one lobe (similar to Honda designs) that actuates both intake and exhaust valves. It's sintered steel and is integrated with the sprocket.
 

panchothedog

Well-known member
Messages
2,997
Reaction score
4,063
I will. Thanks.

Now I'm gonna look around for specs and availability of performance parts. Got a new cart yesterday and am wondering what engine to put on it.

I've been very happy with my Tillotson electric start, but may install this OHC engine if it can be hotrodded to produce some power.
Does it have a cam up top under the rocker cover ? You could mill and port the head for more compression and better breathing. Like others have said, probably no aftermarket parts. Maybe advance the timing. Would it hold together at sustained higher rpm. Is it governed? If you have a yearning to hot rod a small engine, you need to stick with the modern cloned type stuff. Tilly, Ducar, Predator ect. The hot rod parts availability for those engines is almost limitless.
 

Hellion

Staff Murderator
Messages
9,468
Reaction score
4,393
OTR, you have a mission. Remove the valve cover and observe, or you might just have a lowly pushrod engine with the wrong valve cover. Take pics. 📷📹🤳
 

OneTimeUser

We Don't Rent Pigs
Messages
165
Reaction score
171
Location
Texas
Hellion,

I won't take it apart (got plenty of go cart stuff to do), but I will send case numbers and verify that its OHC. I can tell by looking at the particulars.

Now I want an OHC engine for my new (to me) Mudhed. If I can't find one I'll go with a Tilly.
 

65ShelbyClone

Well-known member
Messages
726
Reaction score
261
Location
SoCal
I took pictures of mine when I had it apart to replace a piled-up rod.100_6343w.jpg

My memory was correct that the model is cast into the outside of the engine, apparently on the cylinder head of the EX27.
100_6243w.jpg

The cam only has a single lobe which really limits what can be done with profiles. Honda does the same thing.
100_6342w.jpg
 

65ShelbyClone

Well-known member
Messages
726
Reaction score
261
Location
SoCal
Apparently there are were performance parts available for the EX21, at least in Australia. ARC even made a rod and flywheel for it. The KX21 is a factory performance version of the EX21 made specifically for kart racing. Interesting.


 
Last edited:

Hellion

Staff Murderator
Messages
9,468
Reaction score
4,393
That’s a neat valve train, @65ShelbyClone Did not expect to see the pressed metal...cam followers. That just leads to more questions.
Thanks for the pics, OTU sucks now. I thought he was cool.

:roflol:
 
Top