Horrible fright strikes again!

[Master Hack]

Out of desperation l bought a set of taps from HF cuz i needed a 10 x 1.25 metricated tap for banjo bolts in my distribution block. After fighting fit problems for a coupla of attempts, l statred checking things.



Apparantly there is no quality control with these clowns.
This is their idea of a 10mm tap.

 

[Sparkwizard]

Does it say 10 1.25 on it? In my situation, I need to drive past 4 auto parts stores, Lowe's and Tractor Supply to get to Hobo Fright.
I hope you didn't wipe out the original threads.

 

[Master Hack]

Does it say 10 1.25 on it

Yeah, that what makes it interesting!
New threads in a new block.
Had to throw one block away after it got f....ed

 

[Hellion]

Is this Pittsburg brand? They have several in house brands. The Taiwanese stuff I like, if India NO THANKS

 

[Master Hack]

Icon!

 

[Denny]

That’s the good brand.

 

[Master Hack]

That’s the good brand.

Compared to what?

 

[Denny]

One-Hung-Low’s chineseum makin thangs company and toiletries.

 

[Grizzlymi]

I bought a set of taps and dies from them a while back. Junk, junk and more junk. A quality set is worth every cent. The HF ones were off super bad. Worked fine through process, but once I put a bolt in the newly tapped piece, bolt was loose and wobbly.

 

[Sparkwizard]

Hammers, pry bars and tool boxes, wrenches to cut up and weld for custom tools...Hobo Fright, everything else, Snap-On, Matco, maybe Craftsman, but never anything technical from HF.

 

[Denny]

What do you expect from a 3rd world sweatshop with children who can’t read let alone read a Mike.

 

[Master Hack]

I buy some of their junk to throw in the pickup or in the buggy, for those situations where a few tools of any kind would be an event saver. The kind that get lost, borrowed and never returned, stolen, rained on or whatever, and ya don't really care, cuz its probably time to replace the junk anyhow!
I have my good tools in the shop where I like them to stay. So I end up with two of everything.

 

[Hellion]

What most don’t realize is that most of the China stuff is across the board, not just in Hazard Fraught. Same China junk is sold everywhere, just with different labels. The thing with the big box stores like Lowe’s, Home Despot, etc, they just charge more for the same crap (with a few exceptions on whether it is crap or not). It’s not a turd world sweatshop anymore, unless it’s Pakistan and the like.

For quality you really do have to go domestic.

 

[Grizzlymi]

HD "HDX" brand tools have treated me well. Mostly screwdrivers, but ratchets are Snap-On only for me. Husky wrenches have done me well and Craftsmen. Craftsmen ratchets are far less superior these days compared to Snap-On. If it is an everyday tool, and you are looking for something reliable, American steel is the only reliable option.

 

[Master Hack]

What most don’t realize is that most of the China stuff is across the board, not just in Hazard Fraught. Same China junk is sold everywhere, just with different labels. The thing with the big box stores like Lowe’s, Home Despot, etc, they just charge more for the same crap (with a few exceptions on whether it is crap or not). It’s not a turd world sweatshop anymore, unless it’s Pakistan and the like.

For quality you really do have to go domestic.

HD "HDX" brand tools have treated me well. Mostly screwdrivers, but ratchets are Snap-On only for me. Husky wrenches have done me well and Craftsmen. Craftsmen ratchets are far less superior these days compared to Snap-On. If it is an everyday tool, and you are looking for something reliable, American steel is the only reliable option.

Zackly right on both counts.
never could justify snap on prices tho.

 

[panchothedog]

Zackly right on both counts.
never could justify snap on prices tho.

Except when you want a good tap that performs as it should. Honestly though I am a bit biased. Not too long ago I was gifted a " Snap On " tap and die set, SAE & Metric.
I doubt that I could have afforded it new. The few I have used cut perfectly.