Horizontal Conversion

Status
Not open for further replies.

kendelrk

redneck engineer
Messages
2,425
Reaction score
9
Location
westland michigan
if its not adjusted right, it takes longer to produce a spark and the timing of the spark dosent agree with the rest of the engine so it dosent fire right
 

sexyvicta

New member
Messages
806
Reaction score
2
from the horses mouth (briggs website):
•An armature air gap that is too wide will prevent spark. Not true. Well, sort of not true. Briggs & Stratton air gaps cannot be made too wide to prevent spark providing the coil is healthy and the engine is spun over fast enough. A wide air gap, say .030" will ever so slightly retard the ignition timing as the magnetic field takes longer to build within the coil windings

so probably not the issue here.

i wonder did you set the cam timing correctly? maybe its a little out (i assume you had it apart when you were playing with the oil slinger etc)


Was it doing this when fitted to the mower? if so then could be valves need work/adjusting as mentioned earlier.
 

kendelrk

redneck engineer
Messages
2,425
Reaction score
9
Location
westland michigan
you cant pull the motor so fast due to it having no counter balance and a light flywheel, "A wide air gap, say .030" will ever so slightly retard the ignition timing as the magnetic field takes longer to build within the coil windings" even ever so slightly is going to be messing around with it more due to its now sideways than vertical
 

karl

Well-known member
Messages
2,449
Reaction score
719
Location
North east Ohio
That air cleaner is not helping. Very restrictive. Like having the choke on. Take it off and try.
 
Status
Not open for further replies.
Top