Sorry.. I don't understand the question...
CDI are ALL DC (otherwise it'd be hard to charge the capacitor in the first place)
that's why they usually sit right next to a rectifier
And yes, you still need a coil (the capacitor or thryristor in this case) the CDI module is basically the charging circuit only..
if you talk about the charging coil (not the ignition coil) then yes.. you also should have one.
Since although the Capacitor will charge happily from a battery and that's enough to provide a spark..
a chargingcoil is more reliable;
it'd be a pain if your tank's full and you're still stranded in the middle of nowhere because the battery died
talking of which.. make sure you get a good rectifier unit as well.. the small single diodes that generally are mounted to industrial engines like that may not be sufficient.
'sid
CDI are ALL DC (otherwise it'd be hard to charge the capacitor in the first place)
that's why they usually sit right next to a rectifier
And yes, you still need a coil (the capacitor or thryristor in this case) the CDI module is basically the charging circuit only..
if you talk about the charging coil (not the ignition coil) then yes.. you also should have one.
Since although the Capacitor will charge happily from a battery and that's enough to provide a spark..
a chargingcoil is more reliable;
it'd be a pain if your tank's full and you're still stranded in the middle of nowhere because the battery died
talking of which.. make sure you get a good rectifier unit as well.. the small single diodes that generally are mounted to industrial engines like that may not be sufficient.
'sid
