I have an older motor from a kart from a guys on craigslist. I know, it could be in any condition. Well by the looks of it, is in pretty good condition.
It's a Harbor Freight 6.5hp clone, specifically the older Blue clone that has Greyhound as the manufacturer.
The problem I am experiencing is it can take any where from 5-15 pulls to get it going. Once it is going it runs like a top, idles great and I have zero complaints.
It has a brand new ebay carburetor, new muffler, fresh gas, new plug gapped at 0.030 (NGK BPR6ES), K&N style air filter and new gas tank. Basically aside from a new motor I am not sure what else it could be.
I have a new recoil/rope assembly I could install if that might help.
Do you think I should try a smaller plug gap?
Maybe try adjusting the idle to a much higher speed to see if that might help?
There is a small screw on the side of the carburetor, some sort of adjust I guess.
From what I've read it could be the gap between the flywheel and coil that should be about the thickness of an index card. Is this easy to adjust/check?
I will entertain all reasonable things to try.
It's a Harbor Freight 6.5hp clone, specifically the older Blue clone that has Greyhound as the manufacturer.
The problem I am experiencing is it can take any where from 5-15 pulls to get it going. Once it is going it runs like a top, idles great and I have zero complaints.
It has a brand new ebay carburetor, new muffler, fresh gas, new plug gapped at 0.030 (NGK BPR6ES), K&N style air filter and new gas tank. Basically aside from a new motor I am not sure what else it could be.
I have a new recoil/rope assembly I could install if that might help.
Do you think I should try a smaller plug gap?
Maybe try adjusting the idle to a much higher speed to see if that might help?
There is a small screw on the side of the carburetor, some sort of adjust I guess.
From what I've read it could be the gap between the flywheel and coil that should be about the thickness of an index card. Is this easy to adjust/check?
I will entertain all reasonable things to try.