HF 2.5 hard starting...

Status
Not open for further replies.

rgvkid

Charlie Don't Surf!
Messages
267
Reaction score
1
Location
Los Angeles, Anaheim
Im having a tough time cold starting the degoverned 2.5 HF engine. I have to pull it like 10x. So far it only has about an hour running time on it. Im not sure which screw to mess with on the carb. When i first started it, it started right away. been test running the kart off and on and its been sitting for about 5 days since the last time i ran it.

After about 6 pulls i adjusted the idle a bit to get it started and had to play with the choke off and on to keep it running until it warmed up enough to run on its own. Maybe its just breaking in and needs adjustments. Im not sure if the air filter im using is to small. Its about the same cubic inches as the stock one. The gas is new 89 octane also. Once i run it a bit it doesn't take as many pull to start up again.

Any tips would be appreciated.
Thanks.
 

Attachments

  • K kart 8.JPG
    K kart 8.JPG
    81.3 KB · Views: 9

T-man

New member
Messages
1,232
Reaction score
4
Location
Missoula,MT
rgv, I have had the same trouble with my 2.5. Pull & pull, I have got so mad at the thing that I allmost grabed my welding hamer and went crazy on the thing. Then checked the plug, cleaned it and it worked ... kind of. It will run for about a half an Hr. but then just quits. I called HF and they said that the jets are set at the factory so they cant be changed or reset. Its hard to belive that. But I have looked the carb over and it looks like something could be done.
I have removed the plug after driving it and the thing is really black , lots of build up, It seems like its burning to rich.
 

robbie

New member
Messages
857
Reaction score
9
Location
Osceola, Missouri
There's something weird about the carburetor on this engine. It likes the choke a lot, when the engine is cold. After it warms up, it floods very easily.

I have two of them, one with a home made air filter and the other with the stock filter. I've noticed that the stock one starts a lot easier.

I've had times when it was hard to start, so I did the standard procedure where you take everything apart and put it all back together for no particular reason, and then it worked great. I can only assume that there was some kind of crap in the bowl.
 

jrmints1415

New member
Messages
570
Reaction score
4
Location
Naperville Illinois
you might want to clean the carb, new spark plug, and check the ignition coil. I have had trouble starting my engines because its so d*** cold! check your idol screw and make sure that you have new gas and oil. pretty much just check everything on the engine even if you think it wont make a difference.
 

rgvkid

Charlie Don't Surf!
Messages
267
Reaction score
1
Location
Los Angeles, Anaheim
I pulled the Plug to see how it looked and it looked fine.

Ander, I adjusted the idle a bit which helped it start easier but after it warms up it wanted to roll a bit at idle so i had to reduce it some. I adjusted the idle so its slightly on the throttle and when i start it ai open the throttle a bit with my other hand which seems to help it start better. i'm gonna get a bit bigger air filter to see if that changes the performance any.

Other then that, she rode the Kart On sat and sunday and it ran great. Im glad i didn't hassle anymore with putting the 3.5 Briggs on. The degoverned 2.5 puts out more then enough that i have to regulate the gas pedal so it doesn't open all the way.
 

Attachments

  • 2.5 HF plug.JPG
    2.5 HF plug.JPG
    37.2 KB · Views: 9

robbie

New member
Messages
857
Reaction score
9
Location
Osceola, Missouri
Yeah, the Harbor Freight 2.5 puts out ridiculous amounts of power, considering the size and price.

If any of you guys learn anything about the carburetor on this engine, be sure to pass on the info. It is a little bit quirky.
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
have you rejetted yet? might want to buy a jet pack (not the kind that makes you fly) and experiment with that.
 

rgvkid

Charlie Don't Surf!
Messages
267
Reaction score
1
Location
Los Angeles, Anaheim
The engine only has about 2 hours on it. Not sure if they make or where to find a jet kit for the 2.5. It seems to start fine if i hold the throttle open a bit till it warms up.
 

Lynx_Genisys

New member
Messages
194
Reaction score
1
Location
Alberta, Canada
sounds lke its runnig lean..

using the choke means extra fuel, or more acurratly, less air..

does it the enigne seem to take a while to warm up? (thats often a sign of running lean as well..)

I know plenty about tunign small engine carbs, but i dont know enough about this engine and carb to be of any real help..

you said it runs better with the OEm filter vs the other one you have.. generaly the OEM ones are more restictive as well, aftermarket ones flow better, so OEM ones allow less air flow.. if it runs sligtly better with the OEM one, then there is yet another sign it runs lean...

i wouls adjust the base idle screw till it stays running stable, then adjust the mixture screw.
turn it out till it sorta stumbles a bit, then turn it im. counting the tunrs till it goes noraml,. then back to a stumble.. then turn it back again half the turns between the "too rich" and "to lean" settings.
then reset the base idle speeed

for startup and idle, this should be enough...

then (preferably with a new plug,) take it wide open, run her wide open someplace, and hit the kill switch, DONT let off the throttle til it comes to a complete stop.. then pull the plug and check her out.. see what it says/looks like.. then you will know if it needs re-jetted etc based on the plug reading..

~L~
 
Status
Not open for further replies.
Top