HELP I got a go kart with 169cc engine

Status
Not open for further replies.

JTSpeedDemon

2019 Build Off Winner!
Messages
4,026
Reaction score
162
Location
Texas
Looks like a Kazuma drifter or one of the countless rebranded ones. Both the chassis and the engine are made in China, and I believe the wheels and hubs are an odd, hard to find size.

I'd steer away from that, too much Made in China for me.
 

Smerft85

Member
Messages
876
Reaction score
22
Location
Southern Colorado
JT, I think you'd have to agree for the $275 I believe the seller is asking, it is in nice shape for a first kart, and with it being a 212 honda clone, there isn't much of a difference in buying a predator. As far as what the O.P. has asked about, this one is the best of three in a lot of ways. It could always be used later to barter into a better kart. Most of the ads that are in thus area are like the first two he posted, people wanting top dollar for clapped out junk, I've looked, and this one is actually from a link I sent to him. It may be Chinese, but it's in good Condition and looks to be taken care of, for under $300 and the ability to drive it once it's home, I don't see harm in picking it up and flipping it before its beat up. I think any of us picking between the three in question, would likely see this as a viable option if we just wanted to ride. I tried contacting the guy with that manco I posted, and he is NOT responsive. This is honestly one of the better ones available in the area.
 

RandomK

Member
Messages
63
Reaction score
0
I'm 5 8 and I'm going to remove gear ration but dont know much about changing the gear ratio
 

JTSpeedDemon

2019 Build Off Winner!
Messages
4,026
Reaction score
162
Location
Texas
JT, I think you'd have to agree for the $275 I believe the seller is asking, it is in nice shape for a first kart, and with it being a 212 honda clone, there isn't much of a difference in buying a predator. As far as what the O.P. has asked about, this one is the best of three in a lot of ways. It could always be used later to barter into a better kart. Most of the ads that are in thus area are like the first two he posted, people wanting top dollar for clapped out junk, I've looked, and this one is actually from a link I sent to him. It may be Chinese, but it's in good Condition and looks to be taken care of, for under $300 and the ability to drive it once it's home, I don't see harm in picking it up and flipping it before its beat up. I think any of us picking between the three in question, would likely see this as a viable option if we just wanted to ride. I tried contacting the guy with that manco I posted, and he is NOT responsive. This is honestly one of the better ones available in the area.



Ehh, it's all down to the OP's choice. Personally, I'd steer clear, but it would certainly be possible to make a quick buck and wait for a better one.

---------- Post added at 09:46 AM ---------- Previous post was at 09:45 AM ----------

Wait a sec.....

RandomK, in the thread title, you say you GOT a kart already? Are you looking for a second one or were you just considering getting one with a 169cc Subaru Robin? I'm a little confused.
 

RandomK

Member
Messages
63
Reaction score
0
So what could I do to make a quick buck on it

---------- Post added at 08:47 AM ---------- Previous post was at 08:46 AM ----------

Oh no I don't I meant that about the first one I don't Have one
 

RandomK

Member
Messages
63
Reaction score
0
Put lights on it I have a battery

---------- Post added at 09:37 AM ---------- Previous post was at 09:19 AM ----------

How much could I resell it for
 

RandomK

Member
Messages
63
Reaction score
0
I need help on taking this clutch off. There a little clip thing I dont know what to do to get it off

---------- Post added at 05:57 PM ---------- Previous post was at 05:52 PM ----------



---------- Post added at 06:04 PM ---------- Previous post was at 05:57 PM ----------



---------- Post added at 06:05 PM ---------- Previous post was at 06:04 PM ----------

https://photos.app.goo.gl/iebaZ8rPpjGDhMz56

Nevermind I got it. I judt put greaser and pipped it off
 
Last edited by a moderator:
Status
Not open for further replies.
Top