hello i am new to this forum stuff but need help

[happy_8637]

No i didnt mean i have a gtc. i meant the same style as yours assemetrical (shoulda been more specific) and ok thanks i will try to rack up some pics only got some from about half way through the build but it will still work, thanks alot

 

[landuse]

No i didnt mean i have a gtc. i meant the same style as yours assemetrical (shoulda been more specific) and ok thanks i will try to rack up some pics only got some from about half way through the build but it will still work, thanks alot

Definately post your build log. Also post pics of your TC so that we can get a better idea of your problem

 

[happy_8637]

Ok will when I can find the pics

 

[happy_8637]

ok so heres what i took i think this will work for you guys to tell me.. i know its out of line in the pic but if you fully engage the driven pully it is lined up exactly because someone told me it didnt have to be lined up when it was idling it had to be lined up at wot or fully engaged so thats what i did, oh and i got some different spacers but i didnt have time to show you as i was in a hurry. the factory spacer puts the driver pully in further to the engine like alot more than it needs to be(thats what i thought) then after i ran it with that i made one out of pipe and it was almost perfect but not quite it was still a little more towards the engine than needed in my perspective.hope this is more help

 

[landuse]

Whoever told you that they didn't have to be lined up was talking out their a**. They definately have to be lined up with the engine turned off. Line them up properly and your belt chewing problem will more than likely be solved

 

[happy_8637]

i really appreciate the help landuse and as i said i didnt know anything about them and he said he did lol.. so i hope it does work when i do line them up.... oh and one more thing i tried to look for a belt on bmi and they dont have the one i need. it is 6 13/16-6 7/8 center to center and the belt i have now is 28 1/4-28 1/2 where would be a good place to buy one and its a 6" driven

 

[landuse]

i really appreciate the help landuse and as i said i didnt know anything about them and he said he did lol.. so i hope it does work when i do line them up.... oh and one more thing i tried to look for a belt on bmi and they dont have the one i need. it is 6 13/16-6 7/8 center to center and the belt i have now is 28 1/4-28 1/2 where would be a good place to buy one and its a 6" driven

You can buy them here

http://www.gokartsupply.com/tcbelts.htm

 

[happy_8637]

i know this post is old but i finnally took time to fix the cart. i lined everything up and put the belt on correctly it worked perfectly.. we went riding in the snow for about two hours had a blast thanks for all the help

 

[Half-breeder]

The silver 'spacer' behind your driver is suppose to be the spacer that holds the driver to the shaft...(other side of driver)... leave the black spacer.

 

[landuse]

i know this post is old but i finnally took time to fix the cart. i lined everything up and put the belt on correctly it worked perfectly.. we went riding in the snow for about two hours had a blast thanks for all the help

I am glad you got it sorted out

 

[happy_8637]

yea once i looked at all the pics of other peoples it made more sense and thanks again