Hello from Birmingham Alabama

Status
Not open for further replies.

Solomonster212

High Compression Member
Messages
234
Reaction score
12
Location
Hoover, Alabama
Hey guys. I just added myself to the map... And here's my intro :D


I own a Murray Explorer, have had it for almost 2 years. It's got a Predator 212cc engine on it. Only mods so far are:
- I replaced the front wheel bushings with bearings
- Put street tires on the rear
- Deleted governor
- Centrifugal clutch swap and jackshaft plate delete

My future plans are to:
- replace the front springs
- nice steering wheel
- nicer seat
- build the engine to be fast as ****

You might catch a couple questions from me here and there, but for the most part I can figure this out myself. Karts are way easier than most other projects.

---------- Post added at 11:07 AM ---------- Previous post was at 11:00 AM ----------

I should also add that I have a Youtube channel that I have been documenting the build on for the past 2 months. I am by no means popular, I just kinda do it for fun and to keep track if my own build lol.

https://www.youtube.com/channel/UCnnPcLbuNRQz6XjfF-8maoA
 

JTSpeedDemon

2019 Build Off Winner!
Messages
4,026
Reaction score
162
Location
Texas
:welcome2:

Sounds like a very fun kart!
I also have a small for fun YouTube channel(Kartssource).
 

jmaack

Active member
Messages
625
Reaction score
136
Hey guys. I just added myself to the map... And here's my intro :D


I own a Murray Explorer, have had it for almost 2 years. It's got a Predator 212cc engine on it. Only mods so far are:
- I replaced the front wheel bushings with bearings
- Put street tires on the rear
- Deleted governor
- Centrifugal clutch swap and jackshaft plate delete

My future plans are to:
- replace the front springs
- nice steering wheel
- nicer seat
- build the engine to be fast as ****

You might catch a couple questions from me here and there, but for the most part I can figure this out myself. Karts are way easier than most other projects.

---------- Post added at 11:07 AM ---------- Previous post was at 11:00 AM ----------

I should also add that I have a Youtube channel that I have been documenting the build on for the past 2 months. I am by no means popular, I just kinda do it for fun and to keep track if my own build lol.

https://www.youtube.com/channel/UCnnPcLbuNRQz6XjfF-8maoA


welcome I'm about 20 mins south of bham in helena.
 

Flyinhillbilly

The great cornholio
Messages
2,468
Reaction score
121
Location
North West Arkansas
Welcome. I subscribed to your YouTube, I also have a small YouTube channel. I’ve been focusing on go karts lately, but historically it’s all over the place.
 

Solomonster212

High Compression Member
Messages
234
Reaction score
12
Location
Hoover, Alabama
welcome I'm about 20 mins south of bham in helena.

Awesome! Nice to see somebody close by!

---------- Post added at 09:37 PM ---------- Previous post was at 09:36 PM ----------

Welcome. I subscribed to your YouTube, I also have a small YouTube channel. I’ve been focusing on go karts lately, but historically it’s all over the place.

Thank you for subscribing! Maybe you can find something you like on there, or not. I try to update weekly so eventually I'll have a nicely built up channel.
 

gegcorp2012

Active member
Messages
491
Reaction score
66
Location
Alabama
Hi @solomonster212 , I'm out I20 E about 30 min from BHM. Welcome aboard.

Sent from my SM-J700T using Tapatalk
 
Status
Not open for further replies.
Top