OPmini
moo
Hey guys, so while looking for parts for my minibike project I found that simple, small aluminum gas tanks are ridiculously expensive! So I decided I'm going to make my own line of high quality, aluminum gas tanks. They will be 100% made in the USA, I'm going to use all billet parts and very thick aluminum.
The tanks will be 3 inches round and 8 inches long, 1/4-inch-thick wall, feature a billet vented gas cap, a billet 1/4 inch fuel barb, and optional mounting tabs.
All of the competitor's tanks go for $100-$160 with less capacity and they're built out of thin materials. Mine will be offered at $80 plus tax and shipping.
Anyways in a couple days i'll put up an ad on Ebay with some pictures and ill post the link here. Cheers!
The tanks will be 3 inches round and 8 inches long, 1/4-inch-thick wall, feature a billet vented gas cap, a billet 1/4 inch fuel barb, and optional mounting tabs.
All of the competitor's tanks go for $100-$160 with less capacity and they're built out of thin materials. Mine will be offered at $80 plus tax and shipping.
Anyways in a couple days i'll put up an ad on Ebay with some pictures and ill post the link here. Cheers!
Last edited: