qtband
Well-known member
I've been working on getting this commercial kart, "Big Blue", up and moving. I have the engine running and I rebuilt the MCP hydraulic brake system. The 9hp Honda has a wet clutch with a 2:1 gear reduction. I gave it a test run and it handles great, but speed is lacking. I'm sure it's built this way because of its original intended purpose.
I'm thinking that I will replace the belt drive with a chain drive and change the ratio to get more speed. If I keep the wet clutch and gear reduction, my rpm at the output shaft will be around 1800 rpm. If I use a 16T on the output, 45T on the axle, my speed will be around 30mph.
My question is... with a gear reduction and this ratio, will the kart be able to get moving from a stop?
I'm thinking that I will replace the belt drive with a chain drive and change the ratio to get more speed. If I keep the wet clutch and gear reduction, my rpm at the output shaft will be around 1800 rpm. If I use a 16T on the output, 45T on the axle, my speed will be around 30mph.
My question is... with a gear reduction and this ratio, will the kart be able to get moving from a stop?