r_chez_08
Should be in the shop...
Yeah you could have a dual engine kart. You would need to sync the throttles perfectly tho.
Are there bearings in the hub? If so, the wheel would be a bit stiffer because there is more side load on the bearings.
Did you snap any pics of the wheel or axle while it was off?
Removing the govenor dosent increase performance too much because that engine reaches peak performance around 3600rpm so by removing the govenor you gain a little hp and rpm but also increased wear.
there is gonna be a point where it would be cheaper just to get a bigger engine. Hf sells a 6.5 hp for 100 bucks plus shiping and craiglist normaly has horizontal shaft engines under 100.
yea sorry about that i just figured out there was 4 pages "duh" i learned my lesson lol. I agree with you that after 3600rpm the power is still climbing just at a cost. I would never compare the quality of a honda to a clone. honda as far as im concered is top of the line. I would rather fix a 10 year old honda than buy a clone however in the begining of the thread he mentioned he didnt have money to buy a new honda i was saying for the price a clone isint horrible but defintely not a honda also ive seen hondas on craiglist for 100 which would be cheaper than modifying a 140 to get more hp. But your right if i had read the whole thread i wouldnt have said what i did sorry about that. still getting the hang of it here.