GAB Version CHEAP.0 Tecumseh OHH50 172cc 5HP

[bob58o]

Got email from Tim Isky.

Have to measure the cam and send the specs.

I got one of the nation's top guys on this!!!

 

[Poboy kartman]

Got email from Tim Isky.

Have to measure the cam and send the specs.

I got one of the nation's top guys on this!!!

There goes "Cheap"!!!!

 

[chancer]

There goes "Cheap"!!!!

What did you expect it says GAB in the Title!

 

[bob58o]

I don't know.

He said he'd try to locate a metal core once I send the measurements.

I was going to measure today, but filled in a shift this morning and now working a double.

I will measure tomorrow.

I want to keep this below 6000 and reflected my desire for a torque cam in my last message to him. I'd take a stock cam if metal.

With Rod and Cam, intake and exhaust, springs ... I'm guessing 3 Bills and don't know what still may fail.
Constantly debating on whether to proceed, cut losses, or sell as is with no gov and stock rod.
If I can get $150 for the engine as is with the TC....
that covers the intake, exhaust, spark plug, and a replacement TC.

 

[bob58o]

0.4965"

 

[bob58o]

0.4980"

 

[bob58o]

3.7445"

 

[bob58o]

2.8715"

 

[bob58o]

gear / spacer?
0.7990"

 

[bob58o]

Other gear / spacer?
Base circle has to be close.

 

[bob58o]

Base circle

 

[bob58o]

Lobe to lobe
1.0085"

 

[bob58o]

Lobe thickness
0.3210"

 

[bob58o]

Better measured lobe thickness
0.3175"

 

[ezcome-ezgo]

Poor cam got the GAB, feels violated.

 

[bob58o]

0.2025" lift

 

[bob58o]

Gear thickness
0.250"

 

[Poboy kartman]

$35 Bob...shipped.

 

[bob58o]

End to lobe
0.757"

 

[bob58o]

End to spacer gear
0.5225"