r_chez_08
Should be in the shop...
Okay, I know it is a carb problem cos I put my gx200 clone carb on and it ran fine, but what the motor does when you rev it is rev up, then go down then up again, then down etc.
I have cleaned the main jet and emulsion tube, but I have managed to snap one of the little plastic brackets that the float pivots on. Could this be the cause of my problem? If so can I replace the bracket? Or shall I get a 80cc motorbike carb instead for £10?
Rob
I have cleaned the main jet and emulsion tube, but I have managed to snap one of the little plastic brackets that the float pivots on. Could this be the cause of my problem? If so can I replace the bracket? Or shall I get a 80cc motorbike carb instead for £10?
Rob