Fun Power Governor Operation

Status
Not open for further replies.

turbojimmy

New member
Messages
91
Reaction score
0
Hi all,

We finally got our Fun Power governor linkage issue solved. It is functioning properly from a mechanical perspective, but when we operate the cart the governor is pulling the throttle shut under a load.

First, here is what we have:





It's a kart I bought used, and the Comet TC was rusty and the belt was worn. At first I thought that the problem was that the TC was not applying a load, and therefore the governor was just doing its job by not allowing me to rev the crap out of the engine with no load.

So, we changed the belt on the TC with a new one that came with a new GTC converter setup. It was a bit shorter and wider, but it really woke the kart up. It will hit its top speed now, and take off good for about 5 feet, but then fall on its face and slooowwwwly get to its top speed. Hill climbing it torturously slow but steady.

If I reach back and work the throttle manually, the thing will actually pull a wheelie and take off. So I know the TC is working. But, for some reason the governor is cutting the throttle. Any ideas? There doesn't appear to be any adjustments.

The only thing I can think of is that if you look at the pics, I am missing some linkage, but I think it's all related to the choke (which doesn't concern me). There is a rod missing that attaches to the tab I circled up to said missing linkage. In the manual it's described as the "governor-idle rod".

I know it's hitting the right top speed because wide-open, flat out, it goes just as fast as our minibike which is geared the same way (and has enough torque off the line to throw you off it - I want that on the kart).
 

turbojimmy

New member
Messages
91
Reaction score
0
if theres a return spring on there(hard to see in pic) that would be your problem, just take it off

You know, I was wondering about that. There is a return spring on there but it doesn't really look like it belongs. We simply swapped it over from the old carb. I'll take it off and see what happens. It's so simple, but I think you might have solved it!

Thanks!
 

turbojimmy

New member
Messages
91
Reaction score
0
Ok. When I take the return spring off, the throttle flops wide open. But the governor pulls it shut once it starts. But, the throttle bounces a bit as it idles. Also, if that governor spring comes off, the throttle is gonna flop wide open and that would be ugly (especially since I don't have a kill switch yet). My kids will be driving/riding in it so I want to make sure it's workign properly.

I think the problem is that the previous owner replaced it with a different style carb. My engine (136212-1026-E1) does not call for a return spring, but does have some linkage that I am missing. I think this is the mechanism that would close the throttle even if the governor weren't attached.

Here's a pic I found here of a similar arrangement:



My cam (circled) is different, but this one has a return spring. The parts diagram I came up with (below) for my model doesn't show this, but does show a rod (#208 in the pic) that comes from the throttle linkage up to some other cam. I don't have this, nor most of the things in this picture. I have the #202 rod, which operates the throttle via a cam and the #266A assembly. The #208 rod is described as "Governor control" and #208A (which sadly is not available) is described as "governor idle".



I guess I need a manual to figure out how to put this thing together properly and safely. Is there an online source for a manual for my model?

Thanks,
Jim
 

mauialoha33

New member
Messages
2
Reaction score
0
Location
Maui, Hawaii
Turbo jimmy.....

Hi there, I was wondering if you could possibly take some pictures of your carburetor/engine. We just bought the same exact cart yesterday and I'm trying to pinpoint any missing pieces as it appears to be unhitched from several areas. Thanks!:rolleyes:
 

flowerman

junior member
Messages
211
Reaction score
0
Location
England, surrey
Mauialoha33 hate to be a kill joy but you need to start a new thread on this topic, you will probs get a better answer anyway.:eek:fftopic:
 
Status
Not open for further replies.
Top