fuel system help

Status
Not open for further replies.

nlarr

New member
Messages
6
Reaction score
0
tank placement? gravity feed? or should the carb be pulling?
6hp 4 stroke
 

devino246

Official DIYGK Chem Nerd
Messages
3,856
Reaction score
17
Location
Lynchburg, VA
with a true gravity setup its flooding out....

Then take the screw off the bottom of the carb, drop the bowl, remove the float, clean the needle and seat, and reassemble.

And FWIW, carbs don't pull. Gas has to flow into the carb bowl by means of either gravity or fuel pump.
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
Seconded. Most fuel inlet valves should be able to hold back 5psi- no gravity setup is going to exceed that. You need to fix it. Furthermore, if it floods with a gravity feed, it'll absolutely GUSH with a pump.
 
Status
Not open for further replies.
Top