Fuel Pump

[1992suburban]

to remove studs Tighten the two nuts down on each other on ONE stud and remove. get longer bolts...

take that bolt to hardware store buy longer. prolly 1/2" longer or 13mm

 

[neebles]

Perfect, worked like a charm...

 

[1992suburban]

welcome!

 

[lemegacool]

i post this for general usefulness lol here is how i mounted mine (make sure you use proper hardware and threadlock... you dont want a bolt being shot by the flywheel!)

 

[1992suburban]

what in the world do you call that??

whats the carb hooked to?

looks WRONG lol

 

[lemegacool]

lol carbs now hooked to the little intake pipe and ready for a test run tomorrow

oh and btw thats a turbocharged gx160

 

[1992suburban]

hahahah didnt see the turbo.. LOL

thats a TINY turbo should spool FAST

 

[lemegacool]

hahahah didnt see the turbo.. LOL

thats a TINY turbo should spool FAST

yeah indeed ! go check the thread "must see stupid kart!!!" this is the buil log of that thing LOL

 

[neebles]

So I pulled the carb mounting studs off, and want to get longer ones, I have been to several hardware stores, 2 mower rental places, and 2 auto parts stores, and none of them have the longer studs I need. They dont even have replacements for the ones I had on there. Does anyone know where I can get 2 M6-1 engine studs, that are 5 1/2 inches long? The problem is all the shops I went to carry standard studs, but mine, being off a clone, are metric.

I havent found much luck online either.

 

[jr dragster T]

Go to Home Depot and buy the 2 long Metric bolts?

 

[anderkart]

You'll probably have to buy long metric bolts, and then cut and use a dye to thread new ends.

 

[neebles]

Go to Home Depot and buy the 2 long Metric bolts?

Neither my Home Depot, or Loews had any long Metric bolts...

You'll probably have to buy long metric bolts, and then cut and use a dye to thread new ends.

Not really an option for me....Dont have the tools or know how.

 

[Kaptain Krunch]

these are pretty close, 6.8" long...but you could always cut them, and a little less than 1 1/2" of threads.
http://www.mcmaster.com/#93275a028/=4f4jtj

 

[neebles]

Once again, the Kaptain comes through.

 

[anderkart]

If your going to order online, NR racing sells the corect longer bolts for instaling their intake-spacer/pulse-fitting ($3)