Hey all - First post here! Too bad it's a help me post!
Anyhow, put a Predator 212 in my doodlebug last saturday, clocked it at 37 max before bouncing off the governor.
.038 Jet, emulsion tube and pilot jet.
air cleaner
straight pipe header
So today, I rip it open and take the governor out. Cam and gear fall out so I line them up before reinstallation.
Link the throttle arm up to the butterfly, fill it with oil, mount it back on the bike - and nothing.
It doesn't even sound like it's turning over. It just sounds like the recoil starter really. Shaft and clutch are spinning, so I know the crank is spinning.
Pulled the plug and it is dry. Have not opened up the valve cover yet.
What could cause this? I disconnected my kill switch and reconnected the stock kill switch, disconnected they yellow oil sensor wire. So I don't think it's electrical.
Does the piston need to be in a certain orientation when lining up the crank and cam? It almost sounds like there is no compression, with how it spins so quietly.
Really at a loss here, it's a 1 week old engine that ran flawlessly.
Thanks y'all!
Anyhow, put a Predator 212 in my doodlebug last saturday, clocked it at 37 max before bouncing off the governor.
.038 Jet, emulsion tube and pilot jet.
air cleaner
straight pipe header
So today, I rip it open and take the governor out. Cam and gear fall out so I line them up before reinstallation.
Link the throttle arm up to the butterfly, fill it with oil, mount it back on the bike - and nothing.
It doesn't even sound like it's turning over. It just sounds like the recoil starter really. Shaft and clutch are spinning, so I know the crank is spinning.
Pulled the plug and it is dry. Have not opened up the valve cover yet.
What could cause this? I disconnected my kill switch and reconnected the stock kill switch, disconnected they yellow oil sensor wire. So I don't think it's electrical.
Does the piston need to be in a certain orientation when lining up the crank and cam? It almost sounds like there is no compression, with how it spins so quietly.
Really at a loss here, it's a 1 week old engine that ran flawlessly.
Thanks y'all!