Guys, have any of you actually had a go kart with a comet 30 series torque converter?
STOCK, the manco Baja 200 with a 5 hp briggs goes 35 mph at 3600 RPM.. so please don't just jump on the gearing bandwagon without checking your facts from reputable sources, and remember that torque converters do compensate to some degree for what a centrifugal clutch cant do.
If you just go off of MPH which accounts for TIRE SIZE, which I think you all have completely glazed over... you get
40 mph with 40 series torque converter,
8-9 hp full size 1 seat
10-13hp larger 2 seat go karts (bigger engines are more in the mini buggy category)
35 mph 5-8 hp small one seat 30 series torque converter 6" driven
28-30 mph two seat 30 series torque converter (some have 7" driven in this case)
25 mph centrifugal clutch, small go kart, flat places
15-17 mph centrifugal clutch, compound reduction jack-shaft, off road
Those tires (11") are very small, so 35 mph is a perfect speed for a small kart with 30 series TAV2. This may be oversimplifying things, but to keep it simple, just go off 1 or 2 seat, large or small, and go off the gearing that reputable go kart manufacturers have set them to.
Sources:
manco dingo/deuce 9-13 hp with 9t/54t and 22" tires 40 series
manco 485 5 hp with 9t/54t and 14.5" tires, 30 series
manco baja 200 5 hp with 9t/54t and 18" tires, 30 series
yerf dog 3203 with 6.5 hp 10t/60t and 20" tires, 30 series
most go karts with cent clutch 12t/72t or 10t/60t 3-6.5hp and 11-15" tires
baja heat/warrior with 19" tires, compound gearing unknown but you can look it up, cent clutch